John Deere 20 Series, Vintage 920 Electrical PARTS
Starter Motors
-
Starter Motor suitable for John Deere - AL110597 AL62690 AL62772 Bosch 369 Type.
Power: 3.1kw.
Volts: 12.
Number of Teeth: 10.
Number of Flange Holes: 2.
Bell Opening: Left.£150.00 Inc VAT £125.00 Exc VATIn stockPart No.5268 -
Starter Motor 12V, 3.1Kw (Mahle) suitable for John Deere - AL110597 AL62690 AL62772 Teeth: 10
Tooth Pitch: 12.29mm
Flange Ø: 82.5mm
Mounting Angle: -45°
Number Of Mounting Bores: 2
Mounting Points Diameter: 105mm
Bore Ø 1: 13.5mm
Rotation Direction: Clockwise
For Flywheel Depth: 38mm
£289.22 Inc VAT £241.02 Exc VAT2-3 working daysPart No.81130 -
Gear Reduction Starter Motor - 12V, 3.2Kw (Mahle) suitable for John Deere - RE519568 RE501680 RE63010 Teeth: 10.
Tooth Pitch: 12.29mm.
Flange Ø: 82.5mm.
Mounting Angle: -45°.
Number Of Mounting Bores: 2.
Mounting Points Diameter: 105mm.
Bore Ø 1: 10.5mm.
Rotation Direction: Clockwise.
For Flywheel Depth: 38mm.
£290.30 Inc VAT £241.92 Exc VAT2-3 working daysPart No.93025 -
Starter Motor - 12V, 3Kw (Mahle) suitable for John Deere - AL67897 AL62690 AR70436 Teeth: 10
Tooth Pitch:12.29mm
Flange Ø: 82.5mm
Mounting Angle: -45°
Number Of Mounting Bores: 2
Mounting Points Diameter: 105mm
Bore Ø 1: 13.5mm
Rotation Direction: Clockwise
For Flywheel Depth: 38mm
£335.12 Inc VAT £279.27 Exc VAT2-3 working daysPart No.93044 -
Starter Motor - 12V, 2.7Kw (Mahle) suitable for John Deere - AL70850 AL41247 AL62690 Teeth: 10
Tooth Pitch: 12.29mm
Flange Ø: 82.5mm
Mounting Angle: -45°
Number Of Mounting Bores: 2
Mounting Points Diameter: 105mm
Bore Ø 1: 13.5mm
Rotation Direction: Clockwise
For Flywheel Depth: 38mm
£355.36 Inc VAT £296.13 Exc VAT2-3 working daysPart No.93011 -
Gear Reduction Starter Motor - 12V, 3.4Kw (Mahle) suitable for John Deere - AL70850 AL62772 AL39700 Teeth: 10.
Tooth Pitch: 12.29mm.
Flange Ø: 82.5mm.
Mounting Angle: -45°.
Number Of Mounting Bores: 2.
Mounting Points Diameter: 105mm.
Bore Ø 1: 13.5mm.
Rotation Direction: Clockwise.
For Flywheel Depth: 38mm.
£307.38 Inc VAT £256.15 Exc VAT2-3 working daysPart No.93031
Alternator
-
Alternator 14V, 70 Amps (Mahle) suitable for John Deere - Belt Pulley Ø: 87mm
Number Of Belts: 1
Rotation Direction: Clockwise
Bore Ø: 8.2mm
Mounting Bores Distance: 56mm
Mounting Points Diameter: 86mm
Distance From Pulley To Alternator: 27mm
£190.54 Inc VAT £158.78 Exc VAT2-3 working daysPart No.81276 -
Alternator (Less Pulley) 14V, 70 Amps suitable for John Deere - For pulley use Agriline Ref. 81281.
These alternators have a built in regulator, if your old alternator has a external regulator with plug then this will need cutting off and loop crimp ends fitted; Alternator terminals are lettered to match old A... Show More£154.75 Inc VAT £128.96 Exc VAT2-3 working daysPart No.50452 -
Alternator 14V, 55 Amps (Mahle) suitable for John Deere - AL35998 AL28516 AL81436 Belt Pulley Ø: 87 mm
Number Of Belts:1
Rotation Direction: Clockwise
Bore Ø: 8.2mm
Mounting Bores Distance:56 mm
Mounting Points Diameter: 86mm
Distance From Pulley To Alternator: 27mm
£165.86 Inc VAT £138.22 Exc VAT2-3 working daysPart No.97014 -
Alternator 14V, 33 Amps (Mahle) suitable for John Deere - AZ23575 TY6605 AL62401 Belt Pulley Ø: 87mm
Number Of Belts: 1
Rotation Direction: Clockwise
Bore Ø: 8.2mm
Mounting Bores Distance: 56mm
Mounting Points Diameter: 83mm
Distance From Pulley To Alternator: 29.3mm
£137.04 Inc VAT £114.20 Exc VATOut of stockPart No.97045 -
Alternator 14V, 33 Amps (Mahle) suitable for John Deere - Alternator 14V, 33 AmpsCurrently unavailablePart No.81126
Alternator Pulley
-
Alternator Pulley suitable for John Deere - For use with Alternator Agriline Ref. 50452.
Bore: 176mm.
Outer Diameter: 92mm.
To Fit Belt (Top Edge) Width: 17mm.£24.00 Inc VAT £20.00 Exc VATOut of stockPart No.81281
Oil Pressure Switch
-
Oil Pressure Switch suitable for John Deere - AR27977 AT85174 Oil Pressure Switch£10.74 Inc VAT £8.95 Exc VAT2-3 working daysPart No.1568
Gauges
-
Fuel Gauge suitable for John Deere - AL18155 AL24187 AL24294 Fitting : 60mm.For use with 1533 Sender£22.80 Inc VAT £19.00 Exc VAT2-3 working daysPart No.80447
Tachometers
-
Tachometer suitable for John Deere - AL30800 RPM Gauge
Dimensions- Body OD: 98mm- Bezel OD: 120mm- Thread OD: 15.60mm- Includes two bulbs
For Models 1020, 1030, 1130... Show More£41.99 Inc VAT £34.99 Exc VAT2-3 working daysPart No.1535
Headlights
-
Headlights- Pair suitable for John Deere - AL12064 AL12065 Headlights- Pair£47.99 Inc VAT £39.99 Exc VAT2-3 working daysPart No.6176
Headlight Spares
-
Bulb 12V 21W BA15S SCC S25- Single suitable for John Deere - Side/Indicator bulb ECC Approved.£0.54 Inc VAT £0.45 Exc VATIn stockPart No.9355
-
Bulb 12V 21W BA15S SCC S25- Box 10 suitable for John Deere - Side/Indicator bulb ECC Approved.£4.80 Inc VAT £4.00 Exc VAT2-3 working daysPart No.9355A
-
Bulb 12V 21W BA15D SBC S25- Box 10 suitable for John Deere - Side/Indicator bulb ECC Approved.£6.60 Inc VAT £5.50 Exc VATOut of stockPart No.9364A
-
Bulb 12V 21W BA15D SBC S25- Single suitable for John Deere - Side/Indicator bulb ECC Approved.£0.78 Inc VAT £0.65 Exc VAT2-3 working daysPart No.9364
Rear Lights
-
Rear Combination Light RH suitable for John Deere - AL24545 Bulbs not supplied. Required bulbs: 9355, 9358, 9359, 9360.£25.19 Inc VAT £20.99 Exc VAT2-3 working daysPart No.9428
-
Rear Combination Light LH suitable for John Deere - Rear Combination Light LH.Dimensions- Width: 95mm- Height: 90mm- Fixing Centres... Show More£13.19 Inc VAT £10.99 Exc VAT2-3 working daysPart No.54021
Rear Combination Light LH suitable for John Deere - AL24544 Bulbs not supplied. Required bulbs: 9355, 9358, 9359, 9360.£23.40 Inc VAT £19.50 Exc VAT2-3 working daysPart No.9427
Beacons
-
Beacon Bracket suitable for John Deere - Supplied with weather rubber cap for when beacon not in place.
Anodised plating for weather resistance.
Pin Height: 100mm.
Fixing Slots: 11mm x 22mm,
Fixing Slots Centre to Centre: 55mm.
£11.99 Inc VAT £9.99 Exc VAT2-3 working daysPart No.8451 -
Beacon Bracket suitable for John Deere - Supplied with weather rubber cap for when beacon not in place.
Anodised plating for weather resistance.
Pin Height: 100mm.
Fixing Slots: 11mm x 22mm,
Fixing Slots Centre to Centre: 80mm.
£9.35 Inc VAT £7.79 Exc VAT2-3 working daysPart No.8452 -
Beacon Bracket suitable for John Deere - Supplied with weather rubber cap for when beacon not in place.
Anodised plating for weather resistance.
Pin Height: 95mm.
Fixing Hole : 8mm
Fixing Holes Centre to Centre: 38mm.£9.35 Inc VAT £7.79 Exc VATIn stockPart No.8450 -
Rotating Warning Beacon suitable for John Deere - For Negative Earth Tractors
Fixed Pin Fitting.
Pin Fitting : 24mm.
Overall Height: 60mm.
Diameter: 125mm.
12V H1 Halogen Bulb.12V / 55W , 24V / 70W.
Impact Resistant Lens.
CE Approved.
Replacement Bulb - Agriline Ref: 9368<... Show More£25.98 Inc VAT £21.65 Exc VAT2-3 working daysPart No.54028
Rotating Warning Beacon suitable for John Deere - Flexible Stem.
Pin Fitting : 24mm.
Overall Height: 315mm.
Diameter: 127mm.
12V H1 Halogen Bulb.
Impact Resistant Lens.
Operating Temperature -30° to 50°.
E Approved.
Replacement Bulb - Agriline Ref: 9368Currently unavailablePart No.A-186
Temperature Switches
-
Temperature Sender suitable for John Deere - DE11572 Thread 5/8" 18 UNI - 42mm£33.00 Inc VAT £27.50 Exc VATOut of stockPart No.74181
