John Deere 3000 Series 3100 Engine PARTS
Cylinder Head Gasket
-
Head Gasket suitable for John Deere - R125865 R515090 R515273 John Deere. 1020 - From Serial Number 085100.£15.00 Inc VAT £12.50 Exc VAT2-3 working daysPart No.1474
Valve Springs
-
Valve Spring - R26125 suitable for John Deere - R26125 R504261 Valve Spring, can be used with both INLET and EXHAUST valve.Product Info- Overall length: 55cm- Overall diameter: 35mm£4.32 Inc VAT £3.60 Exc VAT2-3 working daysPart No.1495
Valve Collets
-
Valve Collet (Pair) suitable for John Deere - T20077 Valve Collet (pair)£1.50 Inc VAT £1.25 Exc VAT2-3 working daysPart No.7407
Valve Ancillaries
-
Valve Stem Cap suitable for John Deere - T20129 Valve Stem CapOD: 13mmID: 9.4mmThickness: 6mm£3.60 Inc VAT £3.00 Exc VAT2-3 working daysPart No.1496
-
Valve Tappet suitable for John Deere - T20073 Valve Tappet£7.20 Inc VAT £6.00 Exc VAT2-3 working daysPart No.1502
Studs Cylinder Head
-
Cylinder Head Stud - 112MM suitable for John Deere - R85363 1/2" UNC 112MM
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4.Then Rotate bolt a further 60 Degrees£10.91 Inc VAT £9.09 Exc VAT2-3 working daysPart No.1464A -
Cylinder Head Stud (Pack of 9) suitable for John Deere - R85363 (x9) 1/2" UNC, 9 Studs Per Pack.
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4. Rotate bolt a further 60 Degrees£22.80 Inc VAT £19.00 Exc VAT2-3 working daysPart No.1464
Oil Cooler
-
Oil Cooler suitable for John Deere - RE38078 RE61769 1140 - From Serial Number 704046. 2850 - From Serial Number 795107. 3200 - From Serial Number 189846. 3300 - From Serial Number 189846. 3400 - From Serial Number 189846.£93.60 Inc VAT £78.00 Exc VAT2-3 working daysPart No.8089
Oil Pumps
-
Oil Pump Assembly - RE35685 suitable for John Deere - AR67074 AR67077 AT18021 Later version Oil Pump with 4 Bolt HolesFor pump with 3 holes, Order Agriline Nr: 1504£59.88 Inc VAT £49.90 Exc VATOut of stockPart No.1504
-
Oil Pump Assembly suitable for John Deere - RE52020 3 Bolt fixing with modification Pipes to suit Pumps that were originally 4 Bolt£137.28 Inc VAT £114.40 Exc VAT2-3 working daysPart No.1505
Piston Engine
-
Piston, Ring & Liner Kit suitable for John Deere - RE24458 Includes Liner O-Rings.£84.00 Inc VAT £70.00 Exc VATOut of stockPart No.4770
-
Piston, Pin & Clips suitable for John Deere - AR79868 AR87738 RE19282 Crown diameter: 105.870mm.Skirt diameter: 106.390mm.Compression height: 66.306mm.Overall height: 112.020mm.Chamber diameter: 58.360mm.Chamber depth: 18.800mm.Pi... Show More£42.96 Inc VAT £35.80 Exc VAT2-3 working daysPart No.1442
Piston Rings Engine
-
Piston Ring Set - DD11831 suitable for John Deere - DD11831 RE15674 RE48818 No. of Rings = 3 (2.97 x 2.36 x 3.45)Please note - These are Agriline brand for the Federal Mogul equivalent please order part number 1443FM.£18.00 Inc VAT £15.00 Exc VAT2-3 working daysPart No.1443
-
Piston Ring Set, Federal Mogul Brand - DD11831 suitable for John Deere - DD11831 RE15674 RE48818 No. of Rings: 3 (2.97 x 2.36 x 3.45)Please note: These are Federal Mogul brand; for the Agriline equivalent please order part number 1443.£25.68 Inc VAT £21.40 Exc VAT2-3 working daysPart No.1443FM
Liners Engine Cyl
-
Liner C/W Seals suitable for John Deere - R131575 Finished Liner. Basic Specifications: Bore Dia 106.508 mm Height 196.930 mm. Comes with Sealing Rings. Wet Liner£33.60 Inc VAT £28.00 Exc VATOut of stockPart No.1444
Liner Shims & ORings
-
Liner Seal Kit suitable for John Deere - AR65507 Contains 3 Seals to Suit Liners 1444 & 1604£3.20 Inc VAT £2.67 Exc VAT2-3 working daysPart No.1450
Sump Gaskets
-
Sump Gasket Paper suitable for John Deere - R123353 R97342 R522030 Paper Alternative to 1481 (Cork)£9.59 Inc VAT £7.99 Exc VAT2-3 working daysPart No.1483
Crankshafts
-
Crankshaft (Genmot) suitable for John Deere - RE56792 Crankshaft (Genmot)£714.00 Inc VAT £595.00 Exc VATOut of stockPart No.72279
Conrod Bearings
-
Conrod Bearing Pair suitable for John Deere - AR71080 AT21138 RE27348 Product is 1 Pair of Shells, STANDARD For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£5.40 Inc VAT £4.50 Exc VAT2-3 working daysPart No.1488
-
Conrod Bearing Pair suitable for John Deere - AR76130 AT21126 RE27358 Product is 1 Pair of Shells, + 0.020" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VAT2-3 working daysPart No.1488B
-
Conrod Bearing Pair suitable for John Deere - RE27349 Product is 1 Pair of Shells, + 0.010" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VAT2-3 working daysPart No.1488A
-
Conrod Bearing Pair suitable for John Deere - AR76131 AT21128 RE27364 Product is 1 Pair of Shells, + 0.030" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VAT2-3 working daysPart No.1488C
Main Bearings
-
Main Bearing Pair suitable for John Deere - AT21139 Flanged Bearing With Intergrated Thrust - STD.£20.92 Inc VAT £17.43 Exc VAT2-3 working daysPart No.1486
Conrods
-
Conrod suitable for John Deere - AR55978 RE16495 RE21076 *Serial Number Break Applies Please View Details*. John Deere. 2040S - From Serial Number 430000. 2650 - Suitable For Collar Shift Transmission Only. 3350 - Upto Serial Number For Spanish Built Models.Small End/Pin size ID: 34mm... Show More£46.80 Inc VAT £39.00 Exc VAT2-3 working daysPart No.1489
Conrod Bushes
-
Small End Bush suitable for John Deere - R56186 R57451 RE63913 Semi Finished. 41mm Piston Pin. Size when reamed Min/Max 41.300 - 41.330 mm£4.20 Inc VAT £3.50 Exc VAT2-3 working daysPart No.1463
-
£4.80 Inc VAT £4.00 Exc VAT2-3 working daysPart No.1462
Conrod Bolts & Nuts
-
Connecting Rod Bolt suitable for John Deere - R516517 R80033 59mm Long. Note, some John Deere Connecting Rod Bolts were set at 54mm£4.20 Inc VAT £3.50 Exc VAT2-3 working daysPart No.1491
-
CONROD BOLT - R501124 suitable for John Deere - R501124 Conrod Bolt.Length: 61mm.Thread: M12 x 1.25.£3.34 Inc VAT £2.78 Exc VAT2-3 working daysPart No.76395
Crankshaft Seals
-
Front Crank Seal suitable for John Deere - AR67942 AT21608 Front Crank Seal£9.00 Inc VAT £7.50 Exc VAT2-3 working daysPart No.1460
-
£21.60 Inc VAT £18.00 Exc VAT2-3 working daysPart No.1461
Camshaft
-
£134.40 Inc VAT £112.00 Exc VAT2-3 working daysPart No.7586
Camshaft Followers
-
Push Rod suitable for John Deere - R82896 T20310 Push RodDimensions- Overall Length: 230mm- Diameter: 8.50mm£9.00 Inc VAT £7.50 Exc VAT2-3 working daysPart No.1503
Air Filters
-
Air Filter- Inner suitable for John Deere - AT171854 Length: 355mm.
I.D: 81mm.
O.D: 98.4mm.
£26.66 Inc VAT £22.22 Exc VATIn stockPart No.1593 -
Fleetguard AF25558 Inner Air Filter suitable for John Deere - RT6005011112 RE505261 AT171854 Inner Air Filter£27.70 Inc VAT £23.08 Exc VAT2-3 working daysPart No.AF25558
-
Fleetguard AF25555 Outer Air Filter suitable for John Deere - RE62220 RT6005011111 KV16429 Outer Air Filter£25.76 Inc VAT £21.47 Exc VAT2-3 working daysPart No.AF25557
-
Air Filter - Outer - 87682993 suitable for John Deere - AT171853 EQ35545/001 RT6005011111 Outer Air FilterDimensionsLength: 356.4mm
Inner diameter: 90.5mm
Outer diameter: 165.1mm£31.20 Inc VAT £26.00 Exc VATIn stockPart No.1592
Oil Filters
-
Oil Filter Spin On suitable for John Deere - AR58956 T19044 Length: 136.7mm.Diameter: 94.1mm.£7.10 Inc VAT £5.92 Exc VAT2-3 working daysPart No.8493
-
Fleetguard LF678 Oil Filter suitable for John Deere - T19044 T19044T RE507204 Overall height: 138mm, OD: 93mm, Thread size: 13/16 - 16 UNS-2B ,£9.60 Inc VAT £8.00 Exc VAT2-3 working daysPart No.LF678
Fuel Filters
-
Fleetguard FS19840 Secondary Fuel Filter suitable for John Deere - RE52987 RE62419 RE64450Fleetguard FS19840 fuel water separator cartridge filter works to remove water and other particulates and ensures clean fuel is delivered to your engine.Length: 173.00 mmLargest OD: 84.00 mmL... Show More£33.47 Inc VAT £27.89 Exc VAT2-3 working daysPart No.FS19840
Fleetguard FS19831 Fuel Filter suitable for John Deere - RE503254 RE50455 RE62418 Overall height: 135mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.£26.40 Inc VAT £22.00 Exc VAT2-3 working daysPart No.FS19831
Secondary Fuel Filter suitable for John Deere - RE52987 RE62419 RE64450 Water Separator Element with Drain. Used On Models With Single Fuel Filter.Currently unavailablePart No.10206
Fuel Filter 5 Micron Final Filter suitable for John Deere - RE503254 RE50455 RE62418 Secondary Fuel/Water Coalescer Element with Drain.Currently unavailablePart No.1585
Fleetguard FS19861 Fuel Filter suitable for John Deere - RE534 RE53400 RE6445 Overall height: 155mm, OD: 84mm, Thread size: -,Currently unavailablePart No.FS19861
Fuel Lift Pumps
-
Fuel Lift Pump w/ Glass Bowl suitable for John Deere - DD13483 DD14292 RE27667 Fuel Lift Pump w/ Glass BowlGasket Included£23.99 Inc VAT £19.99 Exc VAT2-3 working daysPart No.55008
-
Fuel Lift Pump suitable for John Deere - DD13483 DD14292 RE27667 Replacement for original Sofabex or Corona style Lift Pumps.Gasket Included£25.80 Inc VAT £21.50 Exc VATIn stockPart No.55016
Fuel Pipes
-
Tee Fitting - R71963 suitable for John Deere - R71963 Tee fitting for Injectors suitable for John Deere.Thread: M14.£10.80 Inc VAT £9.00 Exc VAT2-3 working daysPart No.76562
Fuel Injectors
-
Injector Seal - R79605 suitable for John Deere - R79605 T29539 Tee Fitting Washer.Seals the top of the fuel injector to the T fitting,One Required per injector, supplied as singles- OD: 13mm- ID: 9mm&n... Show More£1.08 Inc VAT £0.90 Exc VAT2-3 working daysPart No.1513
Fuel Injector RE36935 suitable for John Deere - RE36935 RE36936 SE501098 Fuel InjectorInjector Nozzle marked with - 28480£58.80 Inc VAT £49.00 Exc VAT2-3 working daysPart No.9478A
Injector Line Seal suitable for John Deere - R51936 I/D : 6.2mm
O/D : 10.5mm
Height : 5.8mm£0.24 Inc VAT £0.20 Exc VAT2-3 working daysPart No.1512Fuel Ancillaries
-
Fuel Shut Off Solenoid suitable for John Deere - RE22744 RE54064 Fuel Shut Off Solenoid£21.00 Inc VAT £17.50 Exc VATOut of stockPart No.2073
Fuel Filter Housings
-
Fuel Filter Sediment Bowl - RE51650 suitable for John Deere - RE51650 Fuel filter sediment bowl suitable for John DeereThread Size: M10 x 1.5OD: 80mm£34.80 Inc VAT £29.00 Exc VAT2-3 working daysPart No.76551
-
Final Fuel Filter Head - RE500160 suitable for John Deere - RE500160 Final fuel filter headDimensionsWidth: 4"Length: 4.25"£40.80 Inc VAT £34.00 Exc VAT2-3 working daysPart No.76552
-
