John Deere 40 Series, Classic 3140 Front Axle & Steering PARTS
Front Mudguard
-
Front Mudguard Kit suitable for John Deere - Front Mudguard Kit,Suitable for a wide range of John Deere tractors.Note that this kit secures onto the tractors original mudguard casting (see images). If your machine is missing this part then please or... Show MoreOut of stockPart No.76185
Front Mudguard Kit suitable for John Deere - L216249Front Mudguard Kit,Suitable for a wide range of John Deere tractors.Note that if you machine already has the cast bracket mount installed yon can use Agriline Kit 76185Show More Out of stockPart No.76187
Tie Rod & Steering Joint 4WD
-
Track Rod End - AL32867 suitable for John Deere - AL32867 Track Rod EndSuitable for John Deere£39.60 Inc VAT £33.00 Exc VAT2-3 working daysPart No.76776
-
Track Rod End - AL32866 suitable for John Deere - AL32866 Track Rod EndSuitable for John Deere£42.08 Inc VAT £35.07 Exc VAT2-3 working daysPart No.76774
Wheel Rims
-
Wheel Rim 4.50 x 16 suitable for John Deere - AR52506Suitable For Use With Tyre Size:- 6.00 X 16Agriline Recommend Using Their Tyre Reference T-002 Which Is A 6.00 X 16 Tyre, With This Rim.Agriline wheels are manufactured to a high degree of accur... Show More£34.80 Inc VAT £29.00 Exc VAT2-3 working daysPart No.2162
Tyres
-
Tyre 7.50 - 16 (3 Rib) suitable for John Deere - Front 2WD tyre. Brand: ATF. 8 Ply.
Use With 2240 Rim And T-007 Inner Tube£71.99 Inc VAT £59.99 Exc VAT2-3 working daysPart No.T-003 -
Tyre 6.00 - 16 (3 Rib) suitable for John Deere -T-002 is an 8 ply, 3 rib pattern front tyre; widely found on many vintage and classic 2WD farm tractors such as John Deere, David Brown, Ferguson, Fordson, Massey Ferguson, Ford, and Case International.Fits rim size 4.50... Show More£57.00 Inc VAT £47.50 Exc VAT2-3 working daysPart No.T-002
Inner Tubes
-
Inner Tube- Front 6.00 x 16 suitable for John Deere - Use with T-002 Tyre.
Use With 2162 Rim And T-006 Tyre
£11.99 Inc VAT £9.99 Exc VATIn stockPart No.T-006 -
Inner Tube- Front 7.50 x 16 suitable for John Deere - Use with T-003 Tyre.£15.00 Inc VAT £12.50 Exc VATIn stockPart No.T-007
Wheel & Tyre Assemblies
-
Wheel & Tyre Assembly 5.50 x 16 (7.50 x 16 Goodyear Tyre) suitable for John Deere - Contains: Wheel Rim (5.50 x 16) x 1 Tyre - Front Goodyear (7.50 x 16) x 1 Inner Tube (7.50 x16) x 1 Supplied fully assembled - finished in undercoat£210.00 Inc VAT £175.00 Exc VAT2-3 working daysPart No.22010
-
Wheel & Tyre Assembly 5.50 x 16 (7.50 x 16 Tyre) suitable for John Deere -Agriline will handle the hard work for you, saving you the time and effort of assembling your own wheels, or the expense and inconvenience of hiring a fitter. Our team of expert fitters build Agriline wheel assemblies in-house.
Show More £106.80 Inc VAT £89.00 Exc VAT2-3 working daysPart No.22002
Wheel Rim 5.50 x 16 suitable for John Deere - AL68277 AL82488 JD3039Suitable For Use With Tyre Size:- 7.50 X 16Agriline Recommend Using Their Tyre Reference T-003 Which Is A 7.50 X 16 Tyre, With This Rim.Agriline wheels are manufactured to a high degree of... Show More£34.80 Inc VAT £29.00 Exc VATIn stockPart No.2240Track & Drag Ends
-
Track Rod End suitable for John Deere - AL39315 Length: 305mm. Rod/Thread: M24 x 1.5mm Right Hand. Taper: 23.5mm, 26.4mm. Suitable for APL 345 Standard Duty Axle. John Deere. 2140 - Upto Serial Number 024905. 3040 - Upto Serial Number 026316. 3140 - Upto Serial Number 026316.£76.16 Inc VAT £63.47 Exc VAT2-3 working daysPart No.50501
-
Track Rod End suitable for John Deere - AL168702 AL68255 Length: 275mm. Rod/Thread: M28 x 1.5mm Right Hand. Taper: 23.5mm, 26.4mm. Suitable for APL 350 Standard Duty Axle. 3040, 3050, 3140, 3350, 3640, 3650.£90.00 Inc VAT £75.00 Exc VAT2-3 working daysPart No.50522
-
Track Rod End suitable for John Deere - AL168705 AL58013 Track Rod End
- Lock Nut Thread Length (A): 20mm- Taper Diameter (B - C): From 18mm – 20.2mm- Outer Thread Diameter (D): N/A- Effective length (E): 80mm- Thread Size (F): M20 x 1 RHTShow More£62.04 Inc VAT £51.70 Exc VAT2-3 working daysPart No.50503
Track Rod End - RH suitable for John Deere - AL168706 AL58014Track Rod End - RH- Lock Nut Thread Length (A): 29mm- Taper Diameter (B - C): From 23.5mm – 26.5mm- Outer Diameter (D): 42mm- Effective length (E): 295mm- Int... Show More£62.04 Inc VAT £51.70 Exc VAT2-3 working daysPart No.50504
Track Rod End suitable for John Deere - AL168701 AL68254 Track Rod End- Lock Nut Thread Length (A): 29mm- Taper Diameter (B - C): From 23.5mm – 26.5mm- Outer Diameter (D): 42mm- Effective length (E): 269mm- Internal Thread Size (F): M28x1,5 R... Show More£90.00 Inc VAT £75.00 Exc VAT2-3 working daysPart No.50521
Track Rod End - RH suitable for John Deere - AL39318 Length: 305mm. Rod/Thread: M24 x 1.5mm Right Hand. Taper: 23.5mm, 26.4mm. Suitable for APL 345 Standard Duty Axle. John Deere. 2140 - Upto Serial Number 024905. 3040 - Upto Serial Number 026316. 3140 - Upto Serial Number 026316.£80.74 Inc VAT £67.28 Exc VAT2-3 working daysPart No.50502
Steering Joint (LH/RH) - 3426255M1 suitable for John Deere - AL168711 AL39316 AL60161 Steering Joint (LH/RH)Product Info- Length (A): 208mm- Outer Thread Diameter(B): M24 x 1.5 RHT- Outer Thread Diameter (C): M22 x 1.5 RHT- Supplied with Nut£33.60 Inc VAT £28.00 Exc VATIn stockPart No.50526
Steering Joint suitable for John Deere - AL168703 AL68253Steering Joint- Length (A): 246mm- Outer Thread Diameter(B): M28 x 1.5 RHT- Outer Thread Diameter (C): M30 x 1.5 RHTSupplied with Nut.
<... Show More£64.24 Inc VAT £53.53 Exc VAT2-3 working daysPart No.50525Axle Pin Subcom
-
Split Cotter Pin (20 Pack) suitable for John Deere - OD - 4mmWorking Length - 40mm£2.28 Inc VAT £1.90 Exc VAT2-3 working daysPart No.5716
Spindles
-
Spindle LH / RH suitable for John Deere - AR74606 Shaft Length: 375mm.
Shaft Diameter: 44.5mm.£98.18 Inc VAT £81.82 Exc VATOut of stockPart No.74583
Spindle Components
-
Bearing- 37.65 x 55.96 x 16.25mm suitable for John Deere - JD8412 Bearing ID - 37.65 mm OD - 55.96 mm Width - 16.25 mm£9.30 Inc VAT £7.75 Exc VAT2-3 working daysPart No.52003
Wheel Hubs
-
Wheel Hub with Studs suitable for John Deere - R49839 T21545 Requires Wheel Bearing Kit, Agriline Ref. 1540.
Wheel Bearing Hole Diameter, Axle End: 90mm.
Wheel Bearing Hole Diameter, Hub Cap End: 68mm.£56.40 Inc VAT £47.00 Exc VAT2-3 working daysPart No.1551A
Wheel Bearings
-
Outer Wheel Bearing suitable for John Deere - JD8251 JD8929 M88010 2WD Axle. 33.20mm x 68.20mm£11.88 Inc VAT £9.90 Exc VAT2-3 working daysPart No.9307
-
Wheel Bearing Kit suitable for John Deere - JD8969 JD7445 JD8251
For Hubs With Bolt On Hub Cap
£23.99 Inc VAT £19.99 Exc VATOut of stockPart No.1540 -
Taper Roller Bearing - JD7445 suitable for John Deere - 25521 JD7445 JD8969 Taper roller BearingDimensionsID: 45.618mmOD: 83.058mmWidth: 25.4mm£19.20 Inc VAT £16.00 Exc VAT2-3 working daysPart No.76302
Hub Caps
-
Hub Cap - A1555R suitable for John Deere - A1555R Hub Cap suitable for John DeereProduct Info- 3 Bolt Fixing- Bolt Hole: 8.20mm- Distance between centres: 80mm- Grease nipple thread: 1/8 UNF£17.99 Inc VAT £14.99 Exc VAT2-3 working daysPart No.74319
Hub Components
-
Wheel Hub Gasket suitable for John Deere - A1556R
3 Bolt Fixing
£2.88 Inc VAT £2.40 Exc VAT2-3 working daysPart No.74250 -
Hub Oil Seal - AR26480 suitable for John Deere - AR26480Hub Oil Seal suitable for John DeereProduct Info- Outer Diameter: 89.6mm
- Inner Diameter: 60.16mm
- Width: 6mm£4.20 Inc VAT £3.50 Exc VAT2-3 working daysPart No.74562 -
4WD Hub Bush suitable for John Deere - L60088 46mm x 50mm x 30mm
£10.46 Inc VAT £8.72 Exc VAT2-3 working daysPart No.74869 -
Front Hub Seal suitable for John Deere - AL68616 136 x 165 x 13mm£26.50 Inc VAT £22.08 Exc VAT2-3 working daysPart No.75526
-
Hub Seal - AL200971 suitable for John Deere - AL200971 AL68616 AL38045 Hub seal suitable for John Deere and ZF axles.Dimensions.- Inner Diameter: 136.8mm- Outer Diameter: 165mm- Height: 13mm£35.94 Inc VAT £29.95 Exc VAT2-3 working daysPart No.76778
Steering Units
-
Orbital Steering Unit suitable for John Deere - AL55954 Orbital unit for John Deere 40 series**Check spec of orbital unit below**Product Info:- Danfoss spec: OSPB 100 CN 150-0173£234.00 Inc VAT £195.00 Exc VAT2-3 working daysPart No.1548
-
Orbital Steering Unit suitable for John Deere - AL41291 Orbital unit for John Deere 40 & 50 series 4WD**Check spec of orbital unit below**Product Info:- Danfoss spec: OSPC 160 CN 150-0178Show More£239.99 Inc VAT £199.99 Exc VAT2-3 working daysPart No.1549
Steering Wheels
-
Steering Wheel suitable for John Deere - AL28457 T22875Steering WheelDimensions- OD: 425mm- Dish: 130mm- Splined Centre (ID : 22.50mm)£19.80 Inc VAT £16.50 Exc VAT2-3 working daysPart No.1642
Steering Wheel Acc
-
Steering Wheel Woodruff Key suitable for John Deere - 26H77 Steering Wheel Woodruff Key£1.20 Inc VAT £1.00 Exc VATIn stockPart No.5800
4WD Driveshaft
-
King Pin suitable for John Deere - L35745 Up to Serial Number - 42999930MM Upper Diameter (Grease Nipple End)25MM Lower Diameter.49MM Mid Diameter60MM Overall Length£34.80 Inc VAT £29.00 Exc VAT2-3 working daysPart No.72206
-
Drive Shaft Oil Seal suitable for John Deere - AL39338 AL61448 I.D: 46mm.
O.D: 65mm.
Thickness: 15.8mm.£9.90 Inc VAT £8.25 Exc VAT2-3 working daysPart No.80125 -
4WD Drive Shaft Bearing suitable for John Deere - JD8267 JD8295 ZF Axle: APL1351, APL1325, APL345, APL330, APL1351. 28.57 x 64.29 x 21.43£15.00 Inc VAT £12.50 Exc VAT2-3 working daysPart No.9429
-
4WD Driveshaft Bearing suitable for John Deere - ZF Axle: APL315, APL325, APL345, APL350, APL1552, APL1551 34.2mm x 72.2mm x 26.6mm£17.99 Inc VAT £14.99 Exc VAT2-3 working daysPart No.9431
Hub
-
King Pin suitable for John Deere - L35745 Up to Serial Number - 42999930MM Upper Diameter (Grease Nipple End)25MM Lower Diameter.49MM Mid Diameter60MM Overall Length£34.80 Inc VAT £29.00 Exc VAT2-3 working daysPart No.72206
-
4WD Inner & Outer Hub Bearing suitable for John Deere - A26744 ZF Axle: APL3052, APL1551 & APL1552. 63.5mm X 76.2 mm£29.90 Inc VAT £24.92 Exc VAT2-3 working daysPart No.9312
-
4WD King Pin suitable for John Deere - L40004 4WD King Pin.£28.80 Inc VAT £24.00 Exc VAT2-3 working daysPart No.80171
-
O Ring - 770414 suitable for John Deere - T19687 O Ring (BS223) 70 ShoreDimensionsID: 15.88Thickness: 3.18mm£0.13 Inc VAT £0.11 Exc VAT2-3 working daysPart No.76695
-
PLANETARY GEAR REPAIR KIT- L40010 suitable for John Deere - JD10250 L41123 L41159 Planetary gear repair kit.DimensionsOD - 206mmID - 101mmWidth - 55mmTeeth - 51/90Out of stockPart No.76388
4WD Axle
-
4WD King Pin Retainer - L55594 suitable for John Deere - L55594 O ring retainer suitable for top and bottom king pin on ZF APL 345 & 350 axles£5.40 Inc VAT £4.50 Exc VAT2-3 working daysPart No.76790
-
Core Plug - L39993 suitable for John Deere - L39993 Core plug suitable for John Deere and ZF APL 345 & 350 axles.£9.00 Inc VAT £7.50 Exc VAT2-3 working daysPart No.76793
-
Universal Joint - AL64127 suitable for John Deere - AL34709 AL64127 L101809 Universal Joint.Dimensions as follows -30 x 82mm£7.80 Inc VAT £6.50 Exc VATIn stockPart No.76605
-
-
-
