John Deere 40 Series, Classic 3640 Engine PARTS
Cylinder Head Gasket
-
Head Gasket Set suitable for John Deere - AR102264 AR102267 AR102280 Supplied with Cork Rocker Cover Gasket and without Valve Seals.£37.80 Inc VAT £31.50 Exc VAT2-3 working daysPart No.1455
Rocker Cover Gaskets
-
Rocker Cover Gasket suitable for John Deere - R68228 R75728 Rocker Cover Gasket£7.08 Inc VAT £5.90 Exc VAT2-3 working daysPart No.1479
Valve Kits
-
Valve Train Kit suitable for John Deere - Consists of; 6 x Inlet Valve, STD 6 x Exhaust Valve, STD 12 x Valve Spring, Inner 12 x Valve Collet, Pair 12 x Valve Stem Cap£110.74 Inc VAT £92.28 Exc VAT2-3 working daysPart No.1500
Valve Springs
-
Valve Spring - R26125 suitable for John Deere - R26125 R504261 Valve Spring, can be used with both INLET and EXHAUST valve.Product Info- Overall length: 55cm- Overall diameter: 35mm£4.32 Inc VAT £3.60 Exc VAT2-3 working daysPart No.1495
Valve Collets
-
Valve Collet (Pair) suitable for John Deere - T20077 Valve Collet (pair)£1.50 Inc VAT £1.25 Exc VAT2-3 working daysPart No.7407
Valve Ancillaries
-
Valve Stem Cap suitable for John Deere - T20129 Valve Stem CapOD: 13mmID: 9.4mmThickness: 6mm£3.60 Inc VAT £3.00 Exc VAT2-3 working daysPart No.1496
Rocker Components
Studs Cylinder Head
-
Cylinder Head Stud - 112MM suitable for John Deere - R85363 1/2" UNC 112MM
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4.Then Rotate bolt a further 60 Degrees£10.91 Inc VAT £9.09 Exc VAT2-3 working daysPart No.1464A -
Cylinder Head Stud (Pack of 9) suitable for John Deere - R85363 (x9) 1/2" UNC, 9 Studs Per Pack.
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4. Rotate bolt a further 60 Degrees£22.80 Inc VAT £19.00 Exc VAT2-3 working daysPart No.1464
Cyl Block Gaskets
-
Complete Gasket Set suitable for John Deere - AR102265 AR102268 AR74367 Must be supplied with 1464, Stretch Bolts£95.99 Inc VAT £79.99 Exc VAT2-3 working daysPart No.1459
Engine Kits
-
Engine Overhaul Kit suitable for John Deere - Consists of; 6 x Piston, Pin & Clips 6 x Piston Ring Set 6 x Liner c/w Seals 1 x Complete Gasket Set 1 x Front Crank Seal (59mm x 76.5mm x 10mm) 1 x Rear Crank Seal (118mm x 146.1mm x 12.7mm) 6 x Small End Bush- 35mm Piston Pin 3 x Cylind... Show More£518.75 Inc VAT £432.29 Exc VATOut of stockPart No.1472
Oil Cooler
-
Oil Cooler suitable for John Deere - AR64415 AR98852 RE14448 1040 - Upto Serial Number 704045. 1140 - Upto Serial Number 704045. 2150 - From Serial Number 704045. 2850 - Upto Serial Number 795106.£123.60 Inc VAT £103.00 Exc VAT2-3 working daysPart No.8066 -
Oil Cooler suitable for John Deere - AL31239 AL38448 18mm Pipe Diamter£358.80 Inc VAT £299.00 Exc VATOut of stockPart No.74324
Oil Pumps
-
Engine Oil Pump Pipe suitable for John Deere - R113752 Engine Oil Pump PipeOD: 15.60mm£21.60 Inc VAT £18.00 Exc VAT2-3 working daysPart No.81246 -
Oil Pump Assembly - RE35685 suitable for John Deere - AR67074 AR67077 AT18021 Later version Oil Pump with 4 Bolt HolesFor pump with 3 holes, Order Agriline Nr: 1504£59.88 Inc VAT £49.90 Exc VATOut of stockPart No.1504 -
Oil Pump Assembly suitable for John Deere - RE52020 3 Bolt fixing with modification Pipes to suit Pumps that were originally 4 Bolt£137.28 Inc VAT £114.40 Exc VAT2-3 working daysPart No.1505
Piston Engine
-
Piston, Ring & Liner Kit suitable for John Deere - RE24458 Includes Liner O-Rings.£84.00 Inc VAT £70.00 Exc VATOut of stockPart No.4770 -
Piston, Pin & Clips suitable for John Deere - AR79868 AR87738 RE19282 Crown diameter: 105.870mm.Skirt diameter: 106.390mm.Compression height: 66.306mm.Overall height: 112.020mm.Chamber diameter: 58.360mm.Chamber depth: 18.800mm.Pi... Show More£42.96 Inc VAT £35.80 Exc VAT2-3 working daysPart No.1442
Piston Rings Engine
-
Piston Ring Set - DD11831 suitable for John Deere - DD11831 RE15674 RE48818 No. of Rings = 3 (2.97 x 2.36 x 3.45)Please note - These are Agriline brand for the Federal Mogul equivalent please order part number 1443FM.£18.00 Inc VAT £15.00 Exc VAT2-3 working daysPart No.1443 -
Piston Ring Set, Federal Mogul Brand - DD11831 suitable for John Deere - DD11831 RE15674 RE48818 No. of Rings: 3 (2.97 x 2.36 x 3.45)Please note: These are Federal Mogul brand; for the Agriline equivalent please order part number 1443.£25.68 Inc VAT £21.40 Exc VAT2-3 working daysPart No.1443FM
Liners Engine Cyl
-
Liner C/W Seals suitable for John Deere - R131575 Finished Liner. Basic Specifications: Bore Dia 106.508 mm Height 196.930 mm. Comes with Sealing Rings. Wet Liner£33.60 Inc VAT £28.00 Exc VATOut of stockPart No.1444
Liner Shims & ORings
-
Liner Seal Kit suitable for John Deere - AR65507 Contains 3 Seals to Suit Liners 1444 & 1604£3.20 Inc VAT £2.67 Exc VAT2-3 working daysPart No.1450
Sump Gaskets
-
Paper Gasket suitable for John Deere - R56933 R97344 Paper GasketFor cork version please order Agriline part number 76348.£10.80 Inc VAT £9.00 Exc VAT2-3 working daysPart No.1482 -
Cork Sump Gasket suitable for John Deere - R56933 R97344 Cork sump gasket.For Paper gasket, please order Agriline Part No. 1482.£7.20 Inc VAT £6.00 Exc VAT2-3 working daysPart No.76348
Crankshafts
-
Crankshaft 6303D 6329D 6359D 6359T suitable for John Deere - AT22562 T23266 CrankshaftJohn Deere Tractor Engines 6303D, 6329D, 6359D, 6359T.Mains: 3.1235"/3.124"Conrods: 2.7485"/2.749"Stroke: 4.330"Show More £778.80 Inc VAT £649.00 Exc VAT2-3 working daysPart No.8460
Conrod Bearings
-
Conrod Bearing Pair suitable for John Deere - AR71080 AT21138 RE27348 Product is 1 Pair of Shells, STANDARD For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£5.40 Inc VAT £4.50 Exc VAT2-3 working daysPart No.1488
-
Conrod Bearing Pair suitable for John Deere - AR76130 AT21126 RE27358 Product is 1 Pair of Shells, + 0.020" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VAT2-3 working daysPart No.1488B -
Conrod Bearing Pair suitable for John Deere - RE27349 Product is 1 Pair of Shells, + 0.010" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VAT2-3 working daysPart No.1488A -
Conrod Bearing Pair suitable for John Deere - AR76131 AT21128 RE27364 Product is 1 Pair of Shells, + 0.030" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VAT2-3 working daysPart No.1488C
Main Bearings
-
Main Bearing Set suitable for John Deere - AT21134 RE27360 Main Bearing Set +0.020" - John Deere AT21134, RE27360£68.40 Inc VAT £57.00 Exc VAT2-3 working daysPart No.1487B
Conrods
-
Conrod suitable for John Deere - AR55978 RE16495 RE21076 *Serial Number Break Applies Please View Details*. John Deere. 2040S - From Serial Number 430000. 2650 - Suitable For Collar Shift Transmission Only. 3350 - Upto Serial Number For Spanish Built Models.Small End/Pin size ID: 34mm... Show More£46.80 Inc VAT £39.00 Exc VAT2-3 working daysPart No.1489
Conrod Bushes
Conrod Bolts & Nuts
-
Connecting Rod Bolt suitable for John Deere - R516517 R80033 59mm Long. Note, some John Deere Connecting Rod Bolts were set at 54mm£4.20 Inc VAT £3.50 Exc VAT2-3 working daysPart No.1491
Ancillaries Crank
Gears Crank
Crankshaft Seals
-
Front Crank Seal suitable for John Deere - AR67942 AT21608 Front Crank Seal£9.00 Inc VAT £7.50 Exc VAT2-3 working daysPart No.1460
Fly Wheel
-
Flywheel - RE18678 suitable for John Deere - RE18678 AR103749 AR92508 For Clutch 330mm Diameter With 142 Teeth£289.88 Inc VAT £241.57 Exc VAT2-3 working daysPart No.72550
Sump Engine
-
Sump Plug Washer - T13213 suitable for John Deere - T13213 Price is Each (Per Washer)Product Info- Inner Diameter: 22.5mm- Outer Diameter: 30mm- Thickness: 1.5mm£2.99 Inc VAT £2.49 Exc VAT2-3 working daysPart No.1506
Bottom Gasket Sets
-
Bottom Gasket Set suitable for John Deere - Bottom Gasket Set£36.60 Inc VAT £30.50 Exc VAT2-3 working daysPart No.1456
Air Cleaners
-
Pre Cleaner - 1693129M1 suitable for John Deere - AL39934Pre Cleaner suitable for John Deere, David Brown and Massey FergusonProduct Info- Inlet: 76mm (3")- Bowl: 178mm (7")£17.40 Inc VAT £14.50 Exc VATIn stockPart No.2245 -
Air Pre-Cleaner - AZ24175 suitable for John Deere -Air pre cleaner suitable for Ford John Deere and David Brown TractorsInlet: 76mm.
Bowl: 270mm/10"£27.00 Inc VAT £22.50 Exc VATIn stockPart No.9993
Air Filters
-
Fleetguard AF4626 Air Filter - Inner suitable for John Deere - AL30395 CE16309 AL34832Fleetguard AF4626 axial seal secondary air filter ensures a proper seal and prevent leaks to prevent airborne contaminants from reaching the combustion chamber.Height: 331.72 mmLargest ID: 75.70 mm Show More£31.57 Inc VAT £26.31 Exc VAT2-3 working daysPart No.AF4626
Fleetguard AF4564KM Air Filter - Outer suitable for John Deere - AL30394 DE17263Fleetguard AF4564KM Axial Seal Primary Air Filter ensures a proper seal and prevent leaks to prevent airborne contaminants from reaching the combustion chamber.DimensionsEnd 2 ID: 88.34 mm Show More£77.44 Inc VAT £64.53 Exc VAT2-3 working daysPart No.AF4564KMOil Filters
-
Oil Filter Spin On suitable for John Deere - AR58956 T19044 Length: 136.7mm.Diameter: 94.1mm.£7.10 Inc VAT £5.92 Exc VAT2-3 working daysPart No.8493 -
Fleetguard LF678 Oil Filter suitable for John Deere - T19044 T19044T RE507204 Overall height: 138mm, OD: 93mm, Thread size: 13/16 - 16 UNS-2B ,£9.60 Inc VAT £8.00 Exc VAT2-3 working daysPart No.LF678
Fuel Filters
-
Fleetguard FS19831 Fuel Filter suitable for John Deere - RE503254 RE50455 RE62418 Overall height: 135mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.£26.40 Inc VAT £22.00 Exc VAT2-3 working daysPart No.FS19831 -
Fuel Filter suitable for John Deere - AR50041 Glass Fuel Filter- 3 Port- Overall Length: 126.5mm- Overall Width: 94mm- Overall Height: 80mm£21.60 Inc VAT £18.00 Exc VAT2-3 working daysPart No.8494
-
Fuel Filter 5 Micron Final Filter suitable for John Deere - RE503254 RE50455 RE62418 Secondary Fuel/Water Coalescer Element with Drain.Currently unavailablePart No.1585
Filter Kits
-
Filter Service Kit suitable for John Deere - Contains; Oil Filter Fuel Filter Air Filter (Outer) Air Filter (Inner)£120.82 Inc VAT £100.68 Exc VAT2-3 working daysPart No.FSK802
Fuel Lift Pumps
-
Fuel Lift Pump suitable for John Deere - DD13483 DD14292 RE27667 Replacement for original Sofabex or Corona style Lift Pumps.Gasket Included£25.80 Inc VAT £21.50 Exc VATIn stockPart No.55016
Fuel Injectors
-
Injector Seal - R79605 suitable for John Deere - R79605 T29539 Tee Fitting Washer.Seals the top of the fuel injector to the T fitting,One Required per injector, supplied as singles- OD: 13mm- ID: 9mm&n... Show More£1.08 Inc VAT £0.90 Exc VAT2-3 working daysPart No.1513Injector Line Seal suitable for John Deere - R51936 I/D : 6.2mm
O/D : 10.5mm
Height : 5.8mm£0.24 Inc VAT £0.20 Exc VAT2-3 working daysPart No.1512Fuel Pump Repair Kit
-
Fuel Lift Pump Repair Kit suitable for John Deere - RE13517 Repairs Fuel Lift Pump 1508£13.20 Inc VAT £11.00 Exc VATOut of stockPart No.1509
Fuel Ancillaries
-
Fuel Cap suitable for John Deere - AL113086 AL113087 UK Made. Male Thread£9.00 Inc VAT £7.50 Exc VATOut of stockPart No.50442 -
Lockable Fuel Cap suitable for John Deere - AL113086 AL113087 UK Made. Case/IH. 3200 Series - From Serial Number JJE0925810.
£17.94 Inc VAT £14.95 Exc VATIn stockPart No.50443
Exhaust Manifold
-
Exhaust Manifold 6 Cylinder suitable for John Deere - R80982 Exhaust Manifold 6 Cylinder Version. Use Agriline Ref 1507 for gasket.£178.80 Inc VAT £149.00 Exc VAT2-3 working daysPart No.92093 -
Exhaust Manifold suitable for John Deere - CE15515 Exhaust Manifold£234.00 Inc VAT £195.00 Exc VATOut of stockPart No.72249
Gaskets Manifold
-
Exhaust Manifold Gasket suitable for John Deere - R521439 R90658 T20006 Exhaust Manifold Gasket£1.80 Inc VAT £1.50 Exc VAT2-3 working daysPart No.1507
Exhaust Pipe
-
Silencer suitable for John Deere - AL37167 Type: Underhood. Finish: Matt Grey. Fitting Dia: 73 -77mm. Overall Length: 54cm. Silencer Length: 54cm. Silencer Dia: 15 x 23cm.£187.10 Inc VAT £155.92 Exc VAT2-3 working daysPart No.1521
Silencer Pipe
-
Silencer Pipe suitable for John Deere - AL31862 Length: 1330mm. Diameter: 78mm.£53.70 Inc VAT £44.75 Exc VAT2-3 working daysPart No.1654 -
Silencer suitable for John Deere - AL32652 Type: Underhood. Finish: Self Colour. Fitting Dia 76 - 83mm. Overall Length: 36cm. Silencer Length: 36cm. Silencer Dia 2cm. Turbo Models Only.£141.00 Inc VAT £117.50 Exc VAT2-3 working daysPart No.1523 -
Silencer suitable for John Deere - AL37167 Type: Underhood. Finish: Matt Grey. Fitting Dia: 73 -77mm. Overall Length: 54cm. Silencer Length: 54cm. Silencer Dia: 15 x 23cm.£187.10 Inc VAT £155.92 Exc VAT2-3 working daysPart No.1521 -
Silencer Pipe suitable for John Deere - AL34694 Length:1050mm. Diameter: 74mm.£45.00 Inc VAT £37.50 Exc VATOut of stockPart No.1575 -
Silencer Pipe suitable for John Deere - AL61139 Overall Length: 1085mm. Inner Collar Diameter: 75mm.£45.00 Inc VAT £37.50 Exc VATOut of stockPart No.1596 -
Silencer Pipe suitable for John Deere - AL61138 Length: 1280mm Inner Collar Diameter: 75mm.£45.00 Inc VAT £37.50 Exc VAT2-3 working daysPart No.1598
Exhaust Weather Cap
-
3" Weather Cap suitable for John Deere - AR21283 AL28307 Counter balance type weather cap, Suitable for 3" / 76.2mm silencer pipe.£9.60 Inc VAT £8.00 Exc VAT2-3 working daysPart No.75726
-





















































