John Deere 40 Series, Classic 940 Engine PARTS
Cylinder Head Gasket
-
Head Gasket suitable for John Deere - R125865 R515090 R515273 John Deere. 1020 - From Serial Number 085100.£15.00 Inc VAT £12.50 Exc VAT2-3 working daysPart No.1474 -
Head Gasket Set suitable for John Deere - AR102293 AR102297 AR71990 John Deere. 1020 - From Serial Number 085100.£23.99 Inc VAT £19.99 Exc VAT2-3 working daysPart No.1451
Rocker Cover Gaskets
-
Rocker Cover Gasket suitable for John Deere - AR102261 R68226 R75729 Use With Metal Rocker Cover.£6.00 Inc VAT £5.00 Exc VAT2-3 working daysPart No.1477
Valve Kits
-
Valve Train Kit suitable for John Deere - Consists of: 3 x Inlet Valve STD 3 x Exhaust Valve STD 6 x Valve Spring, Inner 6 x Valve Collet (pair) 6 x Valve Stem Cap£69.60 Inc VAT £58.00 Exc VAT2-3 working daysPart No.1497
Valve Springs
-
Valve Spring - R26125 suitable for John Deere - R26125 R504261 Valve Spring, can be used with both INLET and EXHAUST valve.Product Info- Overall length: 55cm- Overall diameter: 35mm£4.32 Inc VAT £3.60 Exc VAT2-3 working daysPart No.1495
Valve Collets
-
Valve Collet suitable for John Deere - T20070 T20077 Valve Collet, Supplied Singularly, Not a Pair. Customers Should Order Two Collets If They Require A Pair.£1.44 Inc VAT £1.20 Exc VAT2-3 working daysPart No.81254
-
Valve Collet (Pair) suitable for John Deere - T20077 Valve Collet (pair)£1.50 Inc VAT £1.25 Exc VAT2-3 working daysPart No.7407
Valve Ancillaries
-
Valve Stem Cap suitable for John Deere - T20129 Valve Stem CapOD: 13mmID: 9.4mmThickness: 6mm£3.60 Inc VAT £3.00 Exc VAT2-3 working daysPart No.1496
-
Valve Tappet suitable for John Deere - T20073 Valve Tappet£7.20 Inc VAT £6.00 Exc VAT2-3 working daysPart No.1502
Rocker Components
-
£16.80 Inc VAT £14.00 Exc VAT2-3 working daysPart No.1501
Studs Cylinder Head
-
Cylinder Head Stud - 112MM suitable for John Deere - R85363 1/2" UNC 112MM
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4.Then Rotate bolt a further 60 Degrees£10.91 Inc VAT £9.09 Exc VAT2-3 working daysPart No.1464A -
Cylinder Head Stud (Pack of 9) suitable for John Deere - R85363 (x9) 1/2" UNC, 9 Studs Per Pack.
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4. Rotate bolt a further 60 Degrees£22.80 Inc VAT £19.00 Exc VAT2-3 working daysPart No.1464
Cyl Block Gaskets
-
Complete Gasket Set suitable for John Deere - AR102290 AR102298 AR53369 Must be supplied with 1464, Stretch Bolts£47.99 Inc VAT £39.99 Exc VATOut of stockPart No.1457
Engine Kits
-
Engine Overhaul Kit suitable for John Deere - Consists of; 3 x Liner c/w Seals 1 x Complete Gasket Set 1 x Front Crank Seal (59mm x 76.5mm x 10mm) 1 x Rear Crank Seal (118mm x 146.1mm x 12.7mm) 3 x Small End Bush- 35mm Piston Pin 1 x Cylinder Head Stud (Pack Of 9)£348.00 Inc VAT £290.00 Exc VATOut of stockPart No.1466
Oil Cooler
-
Oil Cooler suitable for John Deere - AR64415 AR98852 RE14448 1040 - Upto Serial Number 704045. 1140 - Upto Serial Number 704045. 2150 - From Serial Number 704045. 2850 - Upto Serial Number 795106.£123.60 Inc VAT £103.00 Exc VAT2-3 working daysPart No.8066
-
Oil Cooler suitable for John Deere - RE38078 RE61769 1140 - From Serial Number 704046. 2850 - From Serial Number 795107. 3200 - From Serial Number 189846. 3300 - From Serial Number 189846. 3400 - From Serial Number 189846.£93.60 Inc VAT £78.00 Exc VAT2-3 working daysPart No.8089
Oil Pumps
-
Engine Oil Pump Pipe suitable for John Deere - R113752 Engine Oil Pump PipeOD: 15.60mm£21.60 Inc VAT £18.00 Exc VAT2-3 working daysPart No.81246
-
Oil Pump Assembly - RE35685 suitable for John Deere - AR67074 AR67077 AT18021 Later version Oil Pump with 4 Bolt HolesFor pump with 3 holes, Order Agriline Nr: 1504£59.88 Inc VAT £49.90 Exc VATOut of stockPart No.1504
-
Oil Pump Assembly suitable for John Deere - RE52020 3 Bolt fixing with modification Pipes to suit Pumps that were originally 4 Bolt£137.28 Inc VAT £114.40 Exc VAT2-3 working daysPart No.1505
Piston Engine
-
Piston, Ring & Liner Kit suitable for John Deere - RE24458 Includes Liner O-Rings.£84.00 Inc VAT £70.00 Exc VATOut of stockPart No.4770
-
Piston, Pin & Clips suitable for John Deere - AR79868 AR87738 RE19282 Crown diameter: 105.870mm.Skirt diameter: 106.390mm.Compression height: 66.306mm.Overall height: 112.020mm.Chamber diameter: 58.360mm.Chamber depth: 18.800mm.Pi... Show More£42.96 Inc VAT £35.80 Exc VAT2-3 working daysPart No.1442
Piston Rings Engine
-
Piston Ring Set - DD11831 suitable for John Deere - DD11831 RE15674 RE48818 No. of Rings = 3 (2.97 x 2.36 x 3.45)Please note - These are Agriline brand for the Federal Mogul equivalent please order part number 1443FM.£18.00 Inc VAT £15.00 Exc VAT2-3 working daysPart No.1443
-
Piston Ring Set, Federal Mogul Brand - DD11831 suitable for John Deere - DD11831 RE15674 RE48818 No. of Rings: 3 (2.97 x 2.36 x 3.45)Please note: These are Federal Mogul brand; for the Agriline equivalent please order part number 1443.£25.68 Inc VAT £21.40 Exc VAT2-3 working daysPart No.1443FM
Liners Engine Cyl
-
Liner C/W Seals suitable for John Deere - R131575 Finished Liner. Basic Specifications: Bore Dia 106.508 mm Height 196.930 mm. Comes with Sealing Rings. Wet Liner£33.60 Inc VAT £28.00 Exc VATOut of stockPart No.1444
Liner Shims & ORings
-
Liner Seal Kit suitable for John Deere - AR65507 Contains 3 Seals to Suit Liners 1444 & 1604£3.20 Inc VAT £2.67 Exc VAT2-3 working daysPart No.1450
Sump Gaskets
-
£4.20 Inc VAT £3.50 Exc VAT2-3 working daysPart No.1480
Crankshafts
-
Crankshaft suitable for John Deere - AT18031 RE46896 RE47637 CrankshaftJohn Deere Engines 3152D, 3164D, 3179D
1550: Up to Serial Number 751243.
1750: Up to Serial Number 751248.
1850: Up to Serial Number 743472.
2155: Up to Serial Number 743474.Main... Show More£330.00 Inc VAT £275.00 Exc VATOut of stockPart No.8458
Conrod Bearings
-
Conrod Bearing Pair suitable for John Deere - AR71080 AT21138 RE27348 Product is 1 Pair of Shells, STANDARD For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£5.40 Inc VAT £4.50 Exc VAT2-3 working daysPart No.1488
-
Conrod Bearing Pair suitable for John Deere - AR76130 AT21126 RE27358 Product is 1 Pair of Shells, + 0.020" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VAT2-3 working daysPart No.1488B
-
Conrod Bearing Pair suitable for John Deere - RE27349 Product is 1 Pair of Shells, + 0.010" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VAT2-3 working daysPart No.1488A
-
Conrod Bearing Pair suitable for John Deere - AR76131 AT21128 RE27364 Product is 1 Pair of Shells, + 0.030" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VAT2-3 working daysPart No.1488C
Main Bearings
-
Main Bearing Set +0.020" - John Deere AT21134 suitable for John Deere - AT21134 RE27360 Main Bearing Set +0.020" - John Deere AT21134, RE27360£50.40 Inc VAT £42.00 Exc VAT2-3 working daysPart No.1484B
-
Main Bearing Pair suitable for John Deere - AT21139 Flanged Bearing With Intergrated Thrust - STD.£20.92 Inc VAT £17.43 Exc VAT2-3 working daysPart No.1486
-
Main Bearing Set +0.030" - John Deere AT21136 suitable for John Deere - AT21136 RE27368 Main Bearing Set +0.030" - John Deere AT21136, RE27368£50.40 Inc VAT £42.00 Exc VAT2-3 working daysPart No.1484C
-
Currently unavailablePart No.1484
Conrods
-
Conrod suitable for John Deere - AR55978 RE16495 RE21076 *Serial Number Break Applies Please View Details*. John Deere. 2040S - From Serial Number 430000. 2650 - Suitable For Collar Shift Transmission Only. 3350 - Upto Serial Number For Spanish Built Models.Small End/Pin size ID: 34mm... Show More£46.80 Inc VAT £39.00 Exc VAT2-3 working daysPart No.1489
Conrod Bushes
-
£4.80 Inc VAT £4.00 Exc VAT2-3 working daysPart No.1462
Conrod Bolts & Nuts
-
Connecting Rod Bolt suitable for John Deere - R516517 R80033 59mm Long. Note, some John Deere Connecting Rod Bolts were set at 54mm£4.20 Inc VAT £3.50 Exc VAT2-3 working daysPart No.1491
Ancillaries Crank
-
£58.91 Inc VAT £49.09 Exc VAT2-3 working daysPart No.75567
Gears Crank
-
£33.60 Inc VAT £28.00 Exc VAT2-3 working daysPart No.1574
Crankshaft Seals
-
Front Crank Seal suitable for John Deere - AR67942 AT21608 Front Crank Seal£9.00 Inc VAT £7.50 Exc VAT2-3 working daysPart No.1460
-
£21.60 Inc VAT £18.00 Exc VAT2-3 working daysPart No.1461
Sump Engine
-
Sump Plug Washer - T13213 suitable for John Deere - T13213 Price is Each (Per Washer)Product Info- Inner Diameter: 22.5mm- Outer Diameter: 30mm- Thickness: 1.5mm£2.99 Inc VAT £2.49 Exc VAT2-3 working daysPart No.1506
Bottom Gasket Sets
-
Bottom Gasket Set suitable for John Deere - Bottom Gasket Set£19.68 Inc VAT £16.40 Exc VAT2-3 working daysPart No.1452
Air Filters
-
Air Filter- Outer suitable for John Deere - AL65051 Length: 317mm. ID: 82mm. OD: 133.4mm.£59.23 Inc VAT £49.36 Exc VAT2-3 working daysPart No.1526
-
Fleetguard AF1839 Inner Air Filter suitable for John Deere - LAF1735 AR81913 AL27159 Inner Air Filter£23.78 Inc VAT £19.82 Exc VAT2-3 working daysPart No.AF1839
-
Fleetguard AF4212 Air Filter - Outer suitable for John Deere - AL65051Fleetguard AF4212 Axial Seal Primary Air Filter ensures a proper seal and prevent leaks to prevent airborne contaminants from reaching the combustion chamber.DimensionsLargest OD: ... Show More£28.90 Inc VAT £24.08 Exc VAT2-3 working daysPart No.AF4212
Fleetguard AF1830KM Outer Air Filter suitable for John Deere - AE31723 AR71635 AR84228 Outer Air Filter£37.60 Inc VAT £31.33 Exc VAT2-3 working daysPart No.AF1830KM
Fleetguard AF4135 Outer Air Filter suitable for John Deere - AZ18968 Outer Air Filter
Tractors With Pre Cleaner
£29.88 Inc VAT £24.90 Exc VAT2-3 working daysPart No.AF4135
Air Filter- Outer suitable for John Deere - AR84228 Length: 312mm. ID: 82mm. OD: 161.9mm.Currently unavailablePart No.1525
Oil Filters
-
Oil Filter Spin On suitable for John Deere - AR58956 T19044 Length: 136.7mm.Diameter: 94.1mm.£7.10 Inc VAT £5.92 Exc VAT2-3 working daysPart No.8493
-
Fleetguard LF678 Oil Filter suitable for John Deere - T19044 T19044T RE507204 Overall height: 138mm, OD: 93mm, Thread size: 13/16 - 16 UNS-2B ,£9.60 Inc VAT £8.00 Exc VAT2-3 working daysPart No.LF678
Fuel Filters
-
£23.27 Inc VAT £19.39 Exc VAT2-3 working daysPart No.FF203
-
Fleetguard FF167 Fuel Filter suitable for John Deere - AT17387 Fuel Filter
International Dual Fuel Filter System Upto Serial Number 318209
£3.92 Inc VAT £3.27 Exc VAT2-3 working daysPart No.FF167 -
Fuel Filter suitable for John Deere - AR50041 Glass Fuel Filter- 3 Port- Overall Length: 126.5mm- Overall Width: 94mm- Overall Height: 80mm£21.60 Inc VAT £18.00 Exc VAT2-3 working daysPart No.8494
Filter Kits
-
Engine Filter Service Kit suitable for John Deere - Engine filter service kit suitable for John Deere 30,40 and 50 seriesKit Contains- Engine Oil Filter- Fuel Filter- Inner Air FilterShow More£79.18 Inc VAT £65.98 Exc VAT2-3 working daysPart No.FSK-901
Filter Service Kit suitable for John Deere -Filter service kit including Transmission filter, suitable for John Deere 30,40 and 50 series.Kit Contains- Engine Oil Filter- Fuel Filter
Show More £110.93 Inc VAT £92.44 Exc VAT2-3 working daysPart No.FSK-5020Fuel Lift Pumps
-
Fuel Lift Pump w/ Glass Bowl suitable for John Deere - DD13483 DD14292 RE27667 Fuel Lift Pump w/ Glass BowlGasket Included£23.99 Inc VAT £19.99 Exc VAT2-3 working daysPart No.55008
-
Fuel Lift Pump suitable for John Deere - DD13483 DD14292 RE27667 Replacement for original Sofabex or Corona style Lift Pumps.Gasket Included£25.80 Inc VAT £21.50 Exc VATIn stockPart No.55016
Fuel Injectors
-
Injector Seal - R79605 suitable for John Deere - R79605 T29539 Tee Fitting Washer.Seals the top of the fuel injector to the T fitting,One Required per injector, supplied as singles- OD: 13mm- ID: 9mm&n... Show More£1.08 Inc VAT £0.90 Exc VAT2-3 working daysPart No.1513
£52.81 Inc VAT £44.01 Exc VAT2-3 working daysPart No.1510
Fuel Ancillaries
-
£4.20 Inc VAT £3.50 Exc VATIn stockPart No.5424
-
Fuel Cap suitable for John Deere - AL34678 Suitable for plastic tank.
£7.61 Inc VAT £6.34 Exc VAT2-3 working daysPart No.80134
Stop Cables
-
Engine Stop Cable suitable for John Deere - 2100mm PLEASE NOTE THESE CABLES MAY REQUIRE BEING CUT TO THE EXACT SIZE NEEDED.£14.40 Inc VAT £12.00 Exc VATOut of stockPart No.5294
Gasket Exhaust Elbow
-
Exhaust Elbow Gasket suitable for John Deere - L34455 L62441 Exhaust Elbow Gasket£2.40 Inc VAT £2.00 Exc VAT2-3 working daysPart No.1515
Silencer Pipe
-
Silencer suitable for John Deere - AL31552 Under Bonnet. John Deere. 1350 - Upto Serial Number 621999. 1550 - Upto Serial Number 621999. 1750 - Upto Serial Number 621999. 1850 - Upto Serial Number 621999. 2155 - Upto Serial Number 621999.£173.99 Inc VAT £144.99 Exc VAT2-3 working daysPart No.1514
-
£59.99 Inc VAT £49.99 Exc VATOut of stockPart No.1516
-
Silencer Pipe suitable for John Deere - AL34694 Length:1050mm. Diameter: 74mm.£45.00 Inc VAT £37.50 Exc VATOut of stockPart No.1575
-
Silencer Pipe suitable for John Deere - AL61139 Overall Length: 1085mm. Inner Collar Diameter: 75mm.£45.00 Inc VAT £37.50 Exc VATOut of stockPart No.1596
-
Silencer Pipe suitable for John Deere - AL61138 Length: 1280mm Inner Collar Diameter: 75mm.£45.00 Inc VAT £37.50 Exc VAT2-3 working daysPart No.1598
Exhaust Weather Cap
-
3" Weather Cap suitable for John Deere - AR21283 AL28307 Counter balance type weather cap, Suitable for 3" / 76.2mm silencer pipe.£9.60 Inc VAT £8.00 Exc VAT2-3 working daysPart No.75726
-
2" Weather Cap suitable for John Deere - Will suit silencer 3170, 9079, 3186, 3186A, 3176, 3187, 3187A£10.79 Inc VAT £8.99 Exc VAT2-3 working daysPart No.50041
Valves Engine
-
Inlet Valve + 0.015 suitable for John Deere - R57334 R79629 T23547 45 Deg. + 0.015" Oversize£6.00 Inc VAT £5.00 Exc VAT2-3 working daysPart No.1492A
-
Inlet Valve STD suitable for John Deere - R79623 45 Deg. Standard Size£6.00 Inc VAT £5.00 Exc VAT2-3 working daysPart No.1492
-
Exhaust Valve STD suitable for John Deere - R79624 Standard SizeValve Angle = 45 Degrees
Show More£7.80 Inc VAT £6.50 Exc VAT2-3 working daysPart No.1493
Exhaust Valve + 0.015 suitable for John Deere - R57335 R79626 + 0.015" Oversize£8.86 Inc VAT £7.38 Exc VAT2-3 working daysPart No.1493A
-
