John Deere 50 Series, Classic 2850 Engine PARTS
Cylinder Head Gasket
-
£29.99 Inc VAT £24.99 Exc VAT2-3 working daysPart No.1453 -
£14.40 Inc VAT £12.00 Exc VAT2-3 working daysPart No.1475
Rocker Cover Gaskets
-
Rocker Cover Gasket 4 Cyl suitable for John Deere - R73521 T20075 Rocker Cover Gasket 4 Cyl£8.99 Inc VAT £7.49 Exc VAT2-3 working daysPart No.81252
-
Rocker Cover Gasket suitable for John Deere - AR100596 R68227 R73521 Use With Metal Rocker Cover.£5.04 Inc VAT £4.20 Exc VAT2-3 working daysPart No.1478
Valve Kits
-
Valve Train Kit suitable for John Deere - Consists of; 4 x Inlet Valve, STD 4 x Exhaust Valve, STD 8 x Valve Spring, Inner 8 x Valve Stem Cap£78.00 Inc VAT £65.00 Exc VAT2-3 working daysPart No.1499
Valve Springs
-
Valve Spring - R26125 suitable for John Deere - R26125 R504261 Valve Spring, can be used with both INLET and EXHAUST valve.Product Info- Overall length: 55cm- Overall diameter: 35mm£4.32 Inc VAT £3.60 Exc VAT2-3 working daysPart No.1495
Valve Collets
-
Valve Collet suitable for John Deere - T20070 T20077 Valve Collet, Supplied Singularly, Not a Pair. Customers Should Order Two Collets If They Require A Pair.£1.44 Inc VAT £1.20 Exc VAT2-3 working daysPart No.81254
-
Valve Collet (Pair) suitable for John Deere - T20077 Valve Collet (pair)£1.50 Inc VAT £1.25 Exc VAT2-3 working daysPart No.7407
Valve Ancillaries
-
Valve Stem Cap suitable for John Deere - T20129 Valve Stem CapOD: 13mmID: 9.4mmThickness: 6mm£3.60 Inc VAT £3.00 Exc VAT2-3 working daysPart No.1496
-
Valve Tappet suitable for John Deere - T20073 Valve Tappet£7.20 Inc VAT £6.00 Exc VAT2-3 working daysPart No.1502
Rocker Components
-
£16.80 Inc VAT £14.00 Exc VAT2-3 working daysPart No.1501
Studs Cylinder Head
-
Cylinder Head Stud - 112MM suitable for John Deere - R85363 1/2" UNC 112MM
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4.Then Rotate bolt a further 60 Degrees£10.91 Inc VAT £9.09 Exc VAT2-3 working daysPart No.1464A -
Cylinder Head Stud (Pack of 9) suitable for John Deere - R85363 (x9) 1/2" UNC, 9 Studs Per Pack.
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4. Rotate bolt a further 60 Degrees£22.80 Inc VAT £19.00 Exc VAT2-3 working daysPart No.1464
Engine Kits
-
Engine Overhaul Kit suitable for John Deere - Consists of; 4 x Cylinder Kit 1 x Complete Gasket Set 1 x Front Crank Seal (59mm x 76.5mm x 10mm) 1 x Rear Crank Seal (118mm x 146.1mm x 12.7mm) 4 x Small End Bush- 41mm Piston Pin 2 x Cylinder Head Stud (Pack Of 9)£358.80 Inc VAT £299.00 Exc VATOut of stockPart No.1470
Oil Cooler
-
Oil Cooler suitable for John Deere - AR64415 AR98852 RE14448 1040 - Upto Serial Number 704045. 1140 - Upto Serial Number 704045. 2150 - From Serial Number 704045. 2850 - Upto Serial Number 795106.£123.60 Inc VAT £103.00 Exc VAT2-3 working daysPart No.8066
-
Oil Cooler suitable for John Deere - RE38078 RE61769 1140 - From Serial Number 704046. 2850 - From Serial Number 795107. 3200 - From Serial Number 189846. 3300 - From Serial Number 189846. 3400 - From Serial Number 189846.£93.60 Inc VAT £78.00 Exc VAT2-3 working daysPart No.8089
Oil Pumps
-
Engine Oil Pump Pipe suitable for John Deere - R113752 Engine Oil Pump PipeOD: 15.60mm£21.60 Inc VAT £18.00 Exc VAT2-3 working daysPart No.81246
-
Oil Pump Assembly - RE35685 suitable for John Deere - AR67074 AR67077 AT18021 Later version Oil Pump with 4 Bolt HolesFor pump with 3 holes, Order Agriline Nr: 1504£59.88 Inc VAT £49.90 Exc VATOut of stockPart No.1504
-
Oil Pump Assembly suitable for John Deere - RE52020 3 Bolt fixing with modification Pipes to suit Pumps that were originally 4 Bolt£137.28 Inc VAT £114.40 Exc VAT2-3 working daysPart No.1505
Piston Engine
-
Piston, Pin & Clips suitable for John Deere - AR71067 AR87748 RE19278 Crown diameter; 104.750mm.Skirt diameter: 106.390mm.Compression height: 66.300mm.Overall height: 111.970mm.Chamber diameter: 58.420mm.Chamber depth: 18.620mm.Pi... Show More£39.60 Inc VAT £33.00 Exc VAT2-3 working daysPart No.1445
John Deere Piston, Ring & Liner Kit suitable for John Deere - DD11831 RE15674 RE48818 John Deere Piston, Ring & Liner Kit.Liner Bore / Internal Diameter: 106.58mm.Liner Flange Diameter: 125.92mm.Liner Flange Width: 9.79mm.Liner Overall Height: 196.93mm.
Show More £86.40 Inc VAT £72.00 Exc VATOut of stockPart No.1446Piston Rings Engine
-
Piston Ring Set - DD11831 suitable for John Deere - DD11831 RE15674 RE48818 No. of Rings = 3 (2.97 x 2.36 x 3.45)Please note - These are Agriline brand for the Federal Mogul equivalent please order part number 1443FM.£18.00 Inc VAT £15.00 Exc VAT2-3 working daysPart No.1443
-
Piston Ring Set, Federal Mogul Brand - DD11831 suitable for John Deere - DD11831 RE15674 RE48818 No. of Rings: 3 (2.97 x 2.36 x 3.45)Please note: These are Federal Mogul brand; for the Agriline equivalent please order part number 1443.£25.68 Inc VAT £21.40 Exc VAT2-3 working daysPart No.1443FM
Liners Engine Cyl
-
Liner C/W Seals suitable for John Deere - R131575 Finished Liner. Basic Specifications: Bore Dia 106.508 mm Height 196.930 mm. Comes with Sealing Rings. Wet Liner£33.60 Inc VAT £28.00 Exc VATOut of stockPart No.1444
Liner Shims & ORings
-
Liner Seal Kit suitable for John Deere - AR65507 Contains 3 Seals to Suit Liners 1444 & 1604£3.20 Inc VAT £2.67 Exc VAT2-3 working daysPart No.1450
Sump Gaskets
-
Sump Gasket Paper suitable for John Deere - R123353 R97342 R522030 Paper Alternative to 1481 (Cork)£9.59 Inc VAT £7.99 Exc VAT2-3 working daysPart No.1483
-
Sump Gasket Cork suitable for John Deere - R49515 R97342 R522030 Cork Alternative to 1483 (Paper)£8.40 Inc VAT £7.00 Exc VAT2-3 working daysPart No.1481
Crankshafts
-
Crankshaft - RE20585 suitable for John Deere - RE20585 RE36605 Long nose for tractors with hydraulic pump driven of crank.Nose Length - 60mm.£474.00 Inc VAT £395.00 Exc VAT2-3 working daysPart No.72277
-
Crankshaft (Genmot) suitable for John Deere - RE56792 Crankshaft (Genmot)£714.00 Inc VAT £595.00 Exc VATOut of stockPart No.72279
-
Crankshaft 4202D 4219D 4239D 4239T suitable for John Deere - AT18030 AT72949 RE33197 CrankshaftJohn Deere Tractor Engines 4202D, 4219D, 4239D, 4239T.
Short Nose for Tractors without Crank Driven Hydraulic Pump.Mains: 3.1235"/3.124"Conrods: 2.7485"/2.749"... Show More£474.00 Inc VAT £395.00 Exc VAT2-3 working daysPart No.8459
Conrod Bearings
-
Conrod Bearing Pair suitable for John Deere - AR71080 AT21138 RE27348 Product is 1 Pair of Shells, STANDARD For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£5.40 Inc VAT £4.50 Exc VAT2-3 working daysPart No.1488
-
Conrod Bearing Pair suitable for John Deere - AR76130 AT21126 RE27358 Product is 1 Pair of Shells, + 0.020" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VAT2-3 working daysPart No.1488B
-
Conrod Bearing Pair suitable for John Deere - RE27349 Product is 1 Pair of Shells, + 0.010" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VAT2-3 working daysPart No.1488A
-
Conrod Bearing Pair suitable for John Deere - AR76131 AT21128 RE27364 Product is 1 Pair of Shells, + 0.030" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VAT2-3 working daysPart No.1488C
Main Bearings
-
£41.64 Inc VAT £34.70 Exc VAT2-3 working daysPart No.1485
-
Main Bearing Pair suitable for John Deere - AT21139 Flanged Bearing With Intergrated Thrust - STD.£20.92 Inc VAT £17.43 Exc VAT2-3 working daysPart No.1486
-
Main Bearing Set +0.030" - John Deere AT21136 suitable for John Deere - AT21136 RE27368 Main Bearing Set +0.030" - John Deere AT21136, RE27368£66.00 Inc VAT £55.00 Exc VAT2-3 working daysPart No.1485C
-
Main Bearing Set +0.010" - John Deere AT21132 suitable for John Deere - AT21132 RE27353 Main Bearing Set +0.010" - John Deere AT21132, RE27353£66.00 Inc VAT £55.00 Exc VATOut of stockPart No.1485A
-
Currently unavailablePart No.1485B
Conrods
-
Conrod - RE16494 suitable for John Deere - AR71068 RE16494 RE42733 Conrod.Small End/Pin size ID: 41mm.Big End ID: 73mm.Total Length: 280mm.Centre to Centre Length: 180mm.£39.60 Inc VAT £33.00 Exc VAT2-3 working daysPart No.76365
Conrod Bushes
-
Small End Bush suitable for John Deere - R56186 R57451 RE63913 Semi Finished. 41mm Piston Pin. Size when reamed Min/Max 41.300 - 41.330 mm£4.20 Inc VAT £3.50 Exc VAT2-3 working daysPart No.1463
Conrod Bolts & Nuts
-
Connecting Rod Bolt suitable for John Deere - R516517 R80033 59mm Long. Note, some John Deere Connecting Rod Bolts were set at 54mm£4.20 Inc VAT £3.50 Exc VAT2-3 working daysPart No.1491
Ancillaries Crank
-
£58.91 Inc VAT £49.09 Exc VAT2-3 working daysPart No.75567
Gears Crank
-
£33.60 Inc VAT £28.00 Exc VAT2-3 working daysPart No.1574
Crankshaft Seals
-
Front Crank Seal suitable for John Deere - AR67942 AT21608 Front Crank Seal£9.00 Inc VAT £7.50 Exc VAT2-3 working daysPart No.1460
-
£21.60 Inc VAT £18.00 Exc VAT2-3 working daysPart No.1461
Fly Wheel
-
Flywheel - RE18678 suitable for John Deere - RE18678 AR103749 AR92508 For Clutch 330mm Diameter With 142 Teeth£289.88 Inc VAT £241.57 Exc VAT2-3 working daysPart No.72550
Camshaft Followers
-
Push Rod suitable for John Deere - R82896 T20310 Push RodDimensions- Overall Length: 230mm- Diameter: 8.50mm£9.00 Inc VAT £7.50 Exc VAT2-3 working daysPart No.1503
Sump Engine
-
Sump Plug Washer - T13213 suitable for John Deere - T13213 Price is Each (Per Washer)Product Info- Inner Diameter: 22.5mm- Outer Diameter: 30mm- Thickness: 1.5mm£2.99 Inc VAT £2.49 Exc VAT2-3 working daysPart No.1506
Bottom Gasket Sets
-
Bottom Gasket Set suitable for John Deere - RE501579 RE524748 RE38857 Bottom Gasket Set£24.43 Inc VAT £20.36 Exc VAT2-3 working daysPart No.1454
Air Cleaners
-
Pre Cleaner - 1693129M1 suitable for John Deere - AL39934Pre Cleaner suitable for John Deere, David Brown and Massey FergusonProduct Info- Inlet: 76mm (3")- Bowl: 178mm (7")£17.40 Inc VAT £14.50 Exc VATIn stockPart No.2245
-
Air Pre-Cleaner - AZ24175 suitable for John Deere -Air pre cleaner suitable for Ford John Deere and David Brown TractorsInlet: 76mm.
Bowl: 270mm/10"£27.00 Inc VAT £22.50 Exc VATIn stockPart No.9993
Air Filters
-
Air Filter - Outer - DE17263 suitable for John Deere - AL30394 DE17263Outer air filter suitable for John Deere 40 and 50 series,*Tractors built in Spain*DimensionsLength: 371mm.ID: 88.1mm.... Show MoreCurrently unavailablePart No.10203
-
Air Filter- Inner - AL67195 suitable for John Deere - AL58730 AL67195Inner air filter suitable for John Deere 50 and 55 seriesDimensionsOuter: 104mmOuter end: 85mmOverall length: 235mm£24.96 Inc VAT £20.80 Exc VAT2-3 working daysPart No.10205
-
Fleetguard AF4058 Outer Air Filter suitable for John Deere - AZ20623 AZ20626 Outer Air FilterDimensionsOD: 163.6mmID: 86.4mmLength: 350.7mm£42.22 Inc VAT £35.18 Exc VAT2-3 working daysPart No.AF4058
-
Air Filter Kit suitable for John Deere - AZ20623 AZ20626 AL58730 Air filter kit suitable for John Deere 50 and 55 Series.Contains:Outer Air Filter (Length: 350.7mm).Inner Air Filter (Length: 235mm).£58.80 Inc VAT £49.00 Exc VAT2-3 working daysPart No.FSK-5015
-
Fleetguard AF4564KM Air Filter - Outer suitable for John Deere - AL30394 DE17263Fleetguard AF4564KM Axial Seal Primary Air Filter ensures a proper seal and prevent leaks to prevent airborne contaminants from reaching the combustion chamber.DimensionsEnd 2 ID: 88.34 mm Show More£77.44 Inc VAT £64.53 Exc VAT2-3 working daysPart No.AF4564KM
Oil Filters
-
Oil Filter Spin On suitable for John Deere - AR58956 T19044 Length: 136.7mm.Diameter: 94.1mm.£7.10 Inc VAT £5.92 Exc VAT2-3 working daysPart No.8493
-
Fleetguard LF678 Oil Filter suitable for John Deere - T19044 T19044T RE507204 Overall height: 138mm, OD: 93mm, Thread size: 13/16 - 16 UNS-2B ,£9.60 Inc VAT £8.00 Exc VAT2-3 working daysPart No.LF678
Fuel Filters
-
£23.27 Inc VAT £19.39 Exc VAT2-3 working daysPart No.FF203
-
Fuel Filter suitable for John Deere - AR50041 Glass Fuel Filter- 3 Port- Overall Length: 126.5mm- Overall Width: 94mm- Overall Height: 80mm£21.60 Inc VAT £18.00 Exc VAT2-3 working daysPart No.8494
-
Fleetguard FF5705 Fuel Filter suitable for John Deere - AL78988 Fuel Filter.Overall Length:- 103MMExternal Diameter:- 103MMFuel Fitting Diameter:- 8MM£10.07 Inc VAT £8.39 Exc VAT2-3 working daysPart No.FF5705
Filter Kits
-
Filter Service Kit suitable for John Deere - Upto Serial Number 634102. Contains; Oil Filter Fuel Filter Air Filter (Outer) Air Filter (Inner)£102.00 Inc VAT £85.00 Exc VAT2-3 working daysPart No.FSK801
Fuel Lift Pumps
-
Fuel Lift Pump w/ Glass Bowl suitable for John Deere - DD13483 DD14292 RE27667 Fuel Lift Pump w/ Glass BowlGasket Included£23.99 Inc VAT £19.99 Exc VAT2-3 working daysPart No.55008
-
Fuel Lift Pump suitable for John Deere - DD13483 DD14292 RE27667 Replacement for original Sofabex or Corona style Lift Pumps.Gasket Included£25.80 Inc VAT £21.50 Exc VATIn stockPart No.55016
-
Fuel Lift Pump suitable for John Deere - RE38009 Sofabex Version Lift Pump, Replaces plastic cap version.Gasket Included£27.00 Inc VAT £22.50 Exc VATOut of stockPart No.1508
Fuel Injectors
-
Injector Seal - R79605 suitable for John Deere - R79605 T29539 Tee Fitting Washer.Seals the top of the fuel injector to the T fitting,One Required per injector, supplied as singles- OD: 13mm- ID: 9mm&n... Show More£1.08 Inc VAT £0.90 Exc VAT2-3 working daysPart No.1513
Fuel Injector suitable for John Deere - AR90023 RE31757 RE37503 Fuel InjectorStanadyne brand, for Agriline brand please order 76118£74.40 Inc VAT £62.00 Exc VATOut of stockPart No.1511
Injector Line Seal suitable for John Deere - R51936 I/D : 6.2mm
O/D : 10.5mm
Height : 5.8mm£0.24 Inc VAT £0.20 Exc VAT2-3 working daysPart No.1512
£52.81 Inc VAT £44.01 Exc VAT2-3 working daysPart No.1510
£45.60 Inc VAT £38.00 Exc VAT2-3 working daysPart No.76204
Fuel Injector - RE31757 suitable for John Deere - AR90023 RE31757 RE37503 Fuel Injector.This Is An Agriline Brand Injector, Agriline Also Supply A Stanadyne Branded Version Of this Injector, Which Is Agriline Part Number 1511, This Can Be Found Within The Related Items Section Opposite.£51.00 Inc VAT £42.50 Exc VAT2-3 working daysPart No.76118Fuel Pump Repair Kit
-
Fuel Lift Pump Repair Kit suitable for John Deere - RE13517 Repairs Fuel Lift Pump 1508£13.20 Inc VAT £11.00 Exc VATOut of stockPart No.1509
Fuel Ancillaries
-
£4.20 Inc VAT £3.50 Exc VATIn stockPart No.5424
-
Fuel Cap suitable for John Deere - AL34678 Suitable for plastic tank.
£7.61 Inc VAT £6.34 Exc VAT2-3 working daysPart No.80134
Throttle Levers
-
Throttle Control Knob L112425 suitable for John Deere - L112425 Throttle Control Knob, redeveloped with a new tool exclusive to Agriline .£11.99 Inc VAT £9.99 Exc VAT2-3 working daysPart No.74743
Gaskets Manifold
-
Exhaust Manifold Gasket suitable for John Deere - R521439 R90658 T20006 Exhaust Manifold Gasket£1.80 Inc VAT £1.50 Exc VAT2-3 working daysPart No.1507
Silencer Pipe
-
Silencer suitable for John Deere - AL39509 AL31815 AL35753Underhood Silencer- Supplied in a Heat Resistant Matt Black Paint- Pipe Fitting Diameter: 66mm- Silencer Entry: 75mm- Stack Length: 135mm<... Show More£162.00 Inc VAT £135.00 Exc VAT2-3 working daysPart No.1519
-
Silencer Pipe suitable for John Deere - AL34694 Length:1050mm. Diameter: 74mm.£45.00 Inc VAT £37.50 Exc VATOut of stockPart No.1575
-
Silencer Pipe suitable for John Deere - AL61139 Overall Length: 1085mm. Inner Collar Diameter: 75mm.£45.00 Inc VAT £37.50 Exc VATOut of stockPart No.1596
-
Silencer Pipe suitable for John Deere - AL61138 Length: 1280mm Inner Collar Diameter: 75mm.£45.00 Inc VAT £37.50 Exc VAT2-3 working daysPart No.1598
Exhaust Weather Cap
-
3" Weather Cap suitable for John Deere - AR21283 AL28307 Counter balance type weather cap, Suitable for 3" / 76.2mm silencer pipe.£9.60 Inc VAT £8.00 Exc VAT2-3 working daysPart No.75726
Valves Engine
-
Inlet Valve + 0.015 suitable for John Deere - R57427 R89221 + 0.015" Oversize£6.00 Inc VAT £5.00 Exc VAT2-3 working daysPart No.1494A
-
Inlet Valve STD suitable for John Deere - R51735 R89219 Inlet Valve STD£6.00 Inc VAT £5.00 Exc VAT2-3 working daysPart No.1494
