John Deere 6000 Series 6505 Engine PARTS
Cylinder Head Gasket
-
Head Gasket Set suitable for John Deere - RE526672 Head Gasket Set£83.88 Inc VAT £69.90 Exc VAT2-3 working daysPart No.50372 -
Head Gasket Set suitable for John Deere - RE526670 RE66082 Head Gasket Set£58.80 Inc VAT £49.00 Exc VAT2-3 working daysPart No.50370
Rocker Cover Gaskets
-
Rocker Cover Gasket suitable for John Deere - R123542 Rocker Cover Gasket£12.00 Inc VAT £10.00 Exc VAT2-3 working daysPart No.1605
Valve Collets
-
Valve Collet (Pair) suitable for John Deere - R91889 Valve Collet (Pair)£2.83 Inc VAT £2.36 Exc VAT2-3 working daysPart No.1614
Studs Cylinder Head
-
Cylinder Head Stud - 112MM suitable for John Deere - R85363 1/2" UNC 112MM
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4.Then Rotate bolt a further 60 Degrees£10.91 Inc VAT £9.09 Exc VAT2-3 working daysPart No.1464A -
Cylinder Head Stud (Pack of 9) suitable for John Deere - R85363 (x9) 1/2" UNC, 9 Studs Per Pack.
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4. Rotate bolt a further 60 Degrees£22.80 Inc VAT £19.00 Exc VAT2-3 working daysPart No.1464
Cyl Block Gaskets
-
Complete Gasket Set - RE66087 suitable for John Deere - R501456 RE501456 RE526965 Complete Gasket Set£90.00 Inc VAT £75.00 Exc VAT2-3 working daysPart No.53219
Oil Pumps
-
Oil Pump RE504914 suitable for John Deere - RE502269 RE504914 RE59582 Oil Pump.Show More£77.82 Inc VAT £64.85 Exc VAT2-3 working daysPart No.75570
Piston Engine
-
Piston, Pin & Clips RE505101 suitable for John Deere - RE505101 RE520589 RE59279 Piston has a 2.5mm radius groove for the top piston ring.Piston Diameter: 106.39mm.Compression Height: 71.65mm.Piston Length: 100.6mm.Pin Diameter: 34.925mm.To suit Bore: 106... Show More£40.80 Inc VAT £34.00 Exc VAT2-3 working daysPart No.1600
Engine Mount
-
Rubber Isolator - AL81953 suitable for John Deere - AL81953Rubber Isolator suitable for 5020, 6000, 6005, 6010, and 6020 Series John Deere applications.Product Info- Fits between engine and chassis rails- Inner Diameter: 13.5mm- Ou... Show More£8.40 Inc VAT £7.00 Exc VAT2-3 working daysPart No.76197
Liner Shims & ORings
-
Liner Seal Kit suitable for John Deere - AR65507 Contains 3 Seals to Suit Liners 1444 & 1604£3.20 Inc VAT £2.67 Exc VAT2-3 working daysPart No.1450
Sump Gaskets
-
Sump Gasket Paper suitable for John Deere - R123353 R97342 R522030 Paper Alternative to 1481 (Cork)£9.59 Inc VAT £7.99 Exc VAT2-3 working daysPart No.1483
Crankshafts
-
Crankshaft - RE50618 suitable for John Deere - R113596 RE504638 RE50618 Genmot Crank Shaft suitable for John Deere *NOTE - Crankshaft will require cleaning to remove any rust preventative prior to fitting*DimensionsMain journal: 80mmConrod journal: 78mmNose length... Show More£570.00 Inc VAT £475.00 Exc VAT2-3 working daysPart No.1621
Crankshaft RE505921 suitable for John Deere - RE505921 Tappered Nose
6 Bolt Hole Flywheel Fixing
£948.00 Inc VAT £790.00 Exc VAT2-3 working daysPart No.74246
Crankshaft RE505921 suitable for John Deere - RE505921 Crankshaft6 Bolt Hole Flywheel FixingMains: 3.1235"/3.064"Conrods: 3.0635"/3.064"Stroke: 5.000"Lip SealHol... Show More£1,080.00 Inc VAT £900.00 Exc VAT2-3 working daysPart No.74254
Crankshaft (Genmot) suitable for John Deere - RE504639 RE515785 RE52850Straight Nose7 Holes flywheel end4 Bolt Holes crank pulley end£1,320.00 Inc VAT £1,100.00 Exc VAT2-3 working daysPart No.75501Main Bearings
-
Main Bearing Pair +0.010" - John Deere RE65911 suitable for John Deere - RE65911 Main Bearing Pair +0.010" - John Deere RE65911Currently unavailablePart No.1609A
-
Main Bearing Thrust (Pair) +0.010" - John Deere RE65912 suitable for John Deere - RE65912 Main Bearing Thrust (Pair) +0.010" - John Deere RE65912Currently unavailablePart No.1608A
-
Currently unavailablePart No.1608
-
Currently unavailablePart No.1609
Conrods
-
Conrod suitable for John Deere - RE500002 RE60272 John Deere. 6515 - Upto serial Number 799999. 6520 - Upto serial Number 799999. 6520SE - Upto serial Number 799999.Small End/Pin size ID: 34.7mm.Big End ID: 82.6mm.Total Le... Show More£66.00 Inc VAT £55.00 Exc VAT2-3 working daysPart No.1620
Conrod Bushes
-
Small End Bush suitable for John Deere - R123960 John Deere. 6515 - Upto serial Number 799999. 6520 - Upto serial Number 799999. 6520SE - Upto serial Number 799999.Dimensions- Overall Length: 31.70mm- ID: 34.60mmShow More£7.20 Inc VAT £6.00 Exc VAT2-3 working daysPart No.1603
Gears Crank
-
£33.60 Inc VAT £28.00 Exc VAT2-3 working daysPart No.1574
Crankshaft Seals
-
Front Crank Seal suitable for John Deere - RE505515 RE516340 RE52346 Front Crank Seal£15.59 Inc VAT £12.99 Exc VAT2-3 working daysPart No.1606
Air Filters
-
Air Filter- Inner suitable for John Deere - AL78224 Length: 131.8mm ID: 92.1mm. OD: 127.8mm. Flange Diameter: 198.4mm.Currently unavailablePart No.10211
-
£38.39 Inc VAT £31.99 Exc VAT2-3 working daysPart No.AF25301
-
£66.00 Inc VAT £55.00 Exc VAT2-3 working daysPart No.AF25300
Oil Filters
-
Oil Filter Spin On suitable for John Deere - RE59754 DZ118286 Oil Filter Spin On£12.00 Inc VAT £10.00 Exc VAT2-3 working daysPart No.10209
-
Fleetguard LF3703 Oil Filter suitable for John Deere - RE59574 RE59754 Overall height: 146mm, OD: 94mm, Thread size: 11/2 - 16 UN-2B UN-2B,£18.00 Inc VAT £15.00 Exc VATOut of stockPart No.LF3703
Fuel Filters
-
Fleetguard FS19840 Secondary Fuel Filter suitable for John Deere - RE52987 RE62419 RE64450Fleetguard FS19840 fuel water separator cartridge filter works to remove water and other particulates and ensures clean fuel is delivered to your engine.Length: 173.00 mmLargest OD: 84.00 mmL... Show More£33.47 Inc VAT £27.89 Exc VAT2-3 working daysPart No.FS19840
Fleetguard FS19830 Fuel Filter suitable for John Deere - RE509208 RE517181 Overall height: 155mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.£21.60 Inc VAT £18.00 Exc VAT2-3 working daysPart No.FS19830
Secondary Fuel Filter suitable for John Deere - RE52987 RE62419 RE64450 Water Separator Element with Drain. Used On Models With Single Fuel Filter.Currently unavailablePart No.10206
Primary Fuel Filter suitable for John Deere - RE509031 30 Microns.
O.D: 83.3mm.
I.D: 16.7mm One End.
Length: 151.6mm.
£25.22 Inc VAT £21.02 Exc VAT2-3 working daysPart No.10215
Fleetguard FS19861 Fuel Filter suitable for John Deere - RE534 RE53400 RE6445 Overall height: 155mm, OD: 84mm, Thread size: -,Currently unavailablePart No.FS19861
Filter Kits
-
Filter Service Kit suitable for John Deere - Contains; Oil Filter Fuel Filter Air Filter (Outer) Air Filter (Inner)£174.62 Inc VAT £145.52 Exc VATOut of stockPart No.FSK804
Fuel Lift Pumps
-
Fuel Pump suitable for John Deere - AL78405 Tank Mounted Fuel Pump- 2 Spade Socket- Pipe Diameter: 10mm- Includes mounting plate and filter£33.60 Inc VAT £28.00 Exc VATIn stockPart No.1613
Fuel Pumps Electric
-
Fuel Pump suitable for John Deere - AL78405 Mounted In Tank. Stanadyne.£125.11 Inc VAT £104.26 Exc VAT2-3 working daysPart No.9477
Fuel Pipes
-
Tee Fitting - R71963 suitable for John Deere - R71963 Tee fitting for Injectors suitable for John Deere.Thread: M14.£10.80 Inc VAT £9.00 Exc VAT2-3 working daysPart No.76562
Fuel Injectors
-
Fuel Injector RE60062 suitable for John Deere - RE60062 RE57469 SE500828 Fuel Injector.Tee Connector Not Included.Suitable For Replacing Injectors With Injector Nozzle Number:- 28478 / 32262£42.00 Inc VAT £35.00 Exc VAT2-3 working daysPart No.1612
-
Fuel Injector - RE48786 suitable for John Deere - RE48786 SE501101 Fuel Injector Nozzle - Marked 29279£46.80 Inc VAT £39.00 Exc VATOut of stockPart No.1611
Fuel Injector Nozzle
-
Injector Seal Kit - RE64292 suitable for John Deere - RE64292 Injector Seal Kit.Suitable for a wide range of John Deere machines fitted with 'Pencil Style' injectors.One kit required per Injector.£4.38 Inc VAT £3.65 Exc VAT2-3 working daysPart No.75961
Fuel Ancillaries
-
Fuel Shut Off Solenoid suitable for John Deere - RE22744 RE54064 Fuel Shut Off Solenoid£21.00 Inc VAT £17.50 Exc VATOut of stockPart No.2073
-
Fuel Cap suitable for John Deere - AL113086 AL113087 UK Made. Male Thread£9.00 Inc VAT £7.50 Exc VATOut of stockPart No.50442
-
Lockable Fuel Cap suitable for John Deere - AL113086 AL113087 UK Made. Case/IH. 3200 Series - From Serial Number JJE0925810.
£17.94 Inc VAT £14.95 Exc VATIn stockPart No.50443
Fuel Filter Housings
-
Fuel Filter Sediment Bowl - RE51650 suitable for John Deere - RE51650 Fuel filter sediment bowl suitable for John DeereThread Size: M10 x 1.5OD: 80mm£34.80 Inc VAT £29.00 Exc VAT2-3 working daysPart No.76551
Valves Engine
-
Exhaust Valve suitable for John Deere - R90692 Exhaust Valve£9.00 Inc VAT £7.50 Exc VAT2-3 working daysPart No.1617
-
Inlet Valve suitable for John Deere - R98062 Inlet Valve£9.00 Inc VAT £7.50 Exc VAT2-3 working daysPart No.1618
-
-
