John Deere 6000 Series 6506 Engine PARTS
Cylinder Head Gasket
-
£19.20 Inc VAT £16.00 Exc VAT2-3 working daysPart No.1476
Rocker Cover Gaskets
-
Rocker Cover Gasket suitable for John Deere - R68228 R75728 Rocker Cover Gasket£7.08 Inc VAT £5.90 Exc VAT2-3 working daysPart No.1479
Valve Springs
-
Valve Spring - R26125 suitable for John Deere - R26125 R504261 Valve Spring, can be used with both INLET and EXHAUST valve.Product Info- Overall length: 55cm- Overall diameter: 35mm£4.32 Inc VAT £3.60 Exc VAT2-3 working daysPart No.1495
Valve Collets
-
Valve Collet (Pair) suitable for John Deere - T20077 Valve Collet (pair)£1.50 Inc VAT £1.25 Exc VAT2-3 working daysPart No.7407
Valve Ancillaries
-
Valve Stem Cap suitable for John Deere - T20129 Valve Stem CapOD: 13mmID: 9.4mmThickness: 6mm£3.60 Inc VAT £3.00 Exc VAT2-3 working daysPart No.1496
-
Valve Cap suitable for John Deere - RE31617 RE37643 RE37644 Valve CapID: 7.75mmOD: 18mmHeight: 12mm£3.00 Inc VAT £2.50 Exc VAT2-3 working daysPart No.1616
-
Exhaust Valve Seat - R85687 suitable for John Deere - R85687 Exhaust Valve Seat suitable for John DeereProduct Info- Inner Diameter: 34mm- Outer Diameter: 43mm£5.40 Inc VAT £4.50 Exc VAT2-3 working daysPart No.1619
-
Valve Retainer suitable for John Deere - RE31323 RE60005 Valve Retainer£10.50 Inc VAT £8.75 Exc VAT2-3 working daysPart No.1615
Studs Cylinder Head
-
Cylinder Head Stud - 112MM suitable for John Deere - R85363 1/2" UNC 112MM
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4.Then Rotate bolt a further 60 Degrees£10.91 Inc VAT £9.09 Exc VAT2-3 working daysPart No.1464A -
Cylinder Head Stud (Pack of 9) suitable for John Deere - R85363 (x9) 1/2" UNC, 9 Studs Per Pack.
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4. Rotate bolt a further 60 Degrees£22.80 Inc VAT £19.00 Exc VAT2-3 working daysPart No.1464
Piston Engine
-
John Deere Piston, Ring & Liner Kit suitable for John Deere - DD11831 RE15674 RE48818 John Deere Piston, Ring & Liner Kit.Liner Bore / Internal Diameter: 106.58mm.Liner Flange Diameter: 125.92mm.Liner Flange Width: 9.79mm.Liner Overall Height: 196.93mm.
Show More £86.40 Inc VAT £72.00 Exc VATOut of stockPart No.1446
Piston Rings Engine
-
Piston Ring Set - DD11831 suitable for John Deere - DD11831 RE15674 RE48818 No. of Rings = 3 (2.97 x 2.36 x 3.45)Please note - These are Agriline brand for the Federal Mogul equivalent please order part number 1443FM.£18.00 Inc VAT £15.00 Exc VAT2-3 working daysPart No.1443
-
Piston Ring Set, Federal Mogul Brand - DD11831 suitable for John Deere - DD11831 RE15674 RE48818 No. of Rings: 3 (2.97 x 2.36 x 3.45)Please note: These are Federal Mogul brand; for the Agriline equivalent please order part number 1443.£25.68 Inc VAT £21.40 Exc VAT2-3 working daysPart No.1443FM
Liners Engine Cyl
-
Liner C/W Seals - R116397 suitable for John Deere - R116397 R115336 R116383 Liner which comes with sealing rings.Dimensions as follows -Bore diameter - 106.27mmFlange diameter - 125.80mmOverall height - 218.86mmFlange width - 9.75mmO... Show More£29.98 Inc VAT £24.98 Exc VAT2-3 working daysPart No.1604
Liner Shims & ORings
-
Liner Seal Kit suitable for John Deere - AR65507 Contains 3 Seals to Suit Liners 1444 & 1604£3.20 Inc VAT £2.67 Exc VAT2-3 working daysPart No.1450
Sump Gaskets
-
Paper Gasket suitable for John Deere - R56933 R97344 Paper GasketFor cork version please order Agriline part number 76348.£10.80 Inc VAT £9.00 Exc VAT2-3 working daysPart No.1482
-
Cork Sump Gasket suitable for John Deere - R56933 R97344 Cork sump gasket.For Paper gasket, please order Agriline Part No. 1482.£7.20 Inc VAT £6.00 Exc VAT2-3 working daysPart No.76348
Crankshafts
-
Crankshaft suitable for John Deere - RE33687 RE45517 RE502191 *Must order 1 x Main Bearings (Part No. 1486) with this Crankshaft*
RE502191 replaces: R104523, R121027, R126921, R501271
Single Bolt Hole Pulley.
Straight Nose.
*NOTE - Crankshaft will require cleaning to remove any rust preventative p... Show More£954.00 Inc VAT £795.00 Exc VAT2-3 working daysPart No.2013
Conrod Bearings
-
Conrod Bearing Pair suitable for John Deere - AR71080 AT21138 RE27348 Product is 1 Pair of Shells, STANDARD For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£5.40 Inc VAT £4.50 Exc VAT2-3 working daysPart No.1488
-
Conrod Bearing Pair suitable for John Deere - AR76130 AT21126 RE27358 Product is 1 Pair of Shells, + 0.020" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VAT2-3 working daysPart No.1488B
-
Conrod Bearing Pair suitable for John Deere - RE27349 Product is 1 Pair of Shells, + 0.010" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VAT2-3 working daysPart No.1488A
-
Conrod Bearing Pair suitable for John Deere - AR76131 AT21128 RE27364 Product is 1 Pair of Shells, + 0.030" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VAT2-3 working daysPart No.1488C
-
Conrod Bearings Pair STD AR97517 suitable for John Deere - AR69098 AR97517 R54801 Standard Size.Width: 26.6mm.John Deere 4045T, 6068T.£7.42 Inc VAT £6.18 Exc VAT2-3 working daysPart No.75572
Main Bearings
-
Main Bearing Pair suitable for John Deere - AT21139 Flanged Bearing With Intergrated Thrust - STD.£20.92 Inc VAT £17.43 Exc VAT2-3 working daysPart No.1486
Conrod Bolts & Nuts
-
Connecting Rod Bolt suitable for John Deere - R516517 R80033 59mm Long. Note, some John Deere Connecting Rod Bolts were set at 54mm£4.20 Inc VAT £3.50 Exc VAT2-3 working daysPart No.1491
-
Conrod Bolt - R74195 suitable for John Deere - R56445 R74195 Conrod BoltDimensions- Thread: 1/2UNF x 35- Overall Length: 74.80mm£4.03 Inc VAT £3.36 Exc VAT2-3 working daysPart No.75568
Ancillaries Crank
-
£58.91 Inc VAT £49.09 Exc VAT2-3 working daysPart No.75567
Crankshaft Seals
-
Front Crank Seal suitable for John Deere - AR67942 AT21608 Front Crank Seal£9.00 Inc VAT £7.50 Exc VAT2-3 working daysPart No.1460
-
£21.60 Inc VAT £18.00 Exc VAT2-3 working daysPart No.1461
Pulleys
-
Fan Belt Tensioner Pulley suitable for John Deere - AL116368 AL112293 AL113385 ID: 17mmOD: 70mmWidth: 35mmM10 Thread£21.60 Inc VAT £18.00 Exc VAT2-3 working daysPart No.75125
Fly Wheel
-
Fly Wheel Ring Gear suitable for John Deere - Fly Wheel Ring Gear£46.80 Inc VAT £39.00 Exc VAT2-3 working daysPart No.72514
Camshaft Followers
-
Push Rod suitable for John Deere - R82896 T20310 Push RodDimensions- Overall Length: 230mm- Diameter: 8.50mm£9.00 Inc VAT £7.50 Exc VAT2-3 working daysPart No.1503
Air Filters
-
£96.00 Inc VAT £80.00 Exc VAT2-3 working daysPart No.AF25341
-
Air Filter- Inner suitable for John Deere - AL78870 Length: 130.2mm. ID: 118.3mm. OD: 161.6mm.Currently unavailablePart No.10208
-
Currently unavailablePart No.AF25334
Oil Filters
-
Oil Filter Spin On suitable for John Deere - AR58956 T19044 Length: 136.7mm.Diameter: 94.1mm.£7.10 Inc VAT £5.92 Exc VAT2-3 working daysPart No.8493
-
Fleetguard LF678 Oil Filter suitable for John Deere - T19044 T19044T RE507204 Overall height: 138mm, OD: 93mm, Thread size: 13/16 - 16 UNS-2B ,£9.60 Inc VAT £8.00 Exc VAT2-3 working daysPart No.LF678
Fuel Filters
-
Fleetguard FS19840 Secondary Fuel Filter suitable for John Deere - RE52987 RE62419 RE64450Fleetguard FS19840 fuel water separator cartridge filter works to remove water and other particulates and ensures clean fuel is delivered to your engine.Length: 173.00 mmLargest OD: 84.00 mmL... Show More£33.47 Inc VAT £27.89 Exc VAT2-3 working daysPart No.FS19840
Fleetguard FS19831 Fuel Filter suitable for John Deere - RE503254 RE50455 RE62418 Overall height: 135mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.£26.40 Inc VAT £22.00 Exc VAT2-3 working daysPart No.FS19831
Secondary Fuel Filter suitable for John Deere - RE52987 RE62419 RE64450 Water Separator Element with Drain. Used On Models With Single Fuel Filter.Currently unavailablePart No.10206
Fleetguard FS19861 Fuel Filter suitable for John Deere - RE534 RE53400 RE6445 Overall height: 155mm, OD: 84mm, Thread size: -,Currently unavailablePart No.FS19861
Filter Kits
-
Filter Service Kit suitable for John Deere - Contains; Oil Filter Fuel Filter Air Filter (Outer) Air Filter (Inner)£190.57 Inc VAT £158.81 Exc VATOut of stockPart No.FSK803
-
Filter Service Kit suitable for John Deere -Filter Kit suitable for John Deere 6506 - 6900with screw on transmission and hydrauic filters.Suitable for Powerquad transmission and 40cm³ hydraulic pumpKit con... Show More£276.00 Inc VAT £230.00 Exc VATOut of stockPart No.FSK-5013
Fuel Lift Pumps
-
Fuel Lift Pump w/ Glass Bowl suitable for John Deere - DD13483 DD14292 RE27667 Fuel Lift Pump w/ Glass BowlGasket Included£23.99 Inc VAT £19.99 Exc VAT2-3 working daysPart No.55008
-
Fuel Lift Pump suitable for John Deere - DD13483 DD14292 RE27667 Replacement for original Sofabex or Corona style Lift Pumps.Gasket Included£25.80 Inc VAT £21.50 Exc VATIn stockPart No.55016
-
Fuel Pump suitable for John Deere - AL78405 Tank Mounted Fuel Pump- 2 Spade Socket- Pipe Diameter: 10mm- Includes mounting plate and filter£33.60 Inc VAT £28.00 Exc VATIn stockPart No.1613
Fuel Pumps Electric
-
Fuel Pump suitable for John Deere - AL78405 Mounted In Tank. Stanadyne.£125.11 Inc VAT £104.26 Exc VAT2-3 working daysPart No.9477
Fuel Pipes
-
Tee Fitting - R71963 suitable for John Deere - R71963 Tee fitting for Injectors suitable for John Deere.Thread: M14.£10.80 Inc VAT £9.00 Exc VAT2-3 working daysPart No.76562
Fuel Injectors
-
Fuel Injector RE36935 suitable for John Deere - RE36935 RE36936 SE501098 Fuel InjectorInjector Nozzle marked with - 28480£58.80 Inc VAT £49.00 Exc VAT2-3 working daysPart No.9478A
-
Injector Line Seal suitable for John Deere - R51936 I/D : 6.2mm
O/D : 10.5mm
Height : 5.8mm£0.24 Inc VAT £0.20 Exc VAT2-3 working daysPart No.1512
Fuel Ancillaries
-
Fuel Shut Off Solenoid suitable for John Deere - RE22744 RE54064 Fuel Shut Off Solenoid£21.00 Inc VAT £17.50 Exc VATOut of stockPart No.2073
-
Fuel Cap suitable for John Deere - AL113086 AL113087 UK Made. Male Thread£9.00 Inc VAT £7.50 Exc VATOut of stockPart No.50442
-
Lockable Fuel Cap suitable for John Deere - AL113086 AL113087 UK Made. Case/IH. 3200 Series - From Serial Number JJE0925810.
£17.94 Inc VAT £14.95 Exc VATIn stockPart No.50443 -
Fuel Shut Off Solenoid - RE22744 suitable for John Deere - RE22744 RE54064 Fuel Shut Off SolenoidFuel Thread OD: 13.7mm£21.60 Inc VAT £18.00 Exc VATOut of stockPart No.2074
Fuel Filter Housings
-
Fuel Filter Sediment Bowl - RE51650 suitable for John Deere - RE51650 Fuel filter sediment bowl suitable for John DeereThread Size: M10 x 1.5OD: 80mm£34.80 Inc VAT £29.00 Exc VAT2-3 working daysPart No.76551
-
Final Fuel Filter Head - RE500160 suitable for John Deere - RE500160 Final fuel filter headDimensionsWidth: 4"Length: 4.25"£40.80 Inc VAT £34.00 Exc VAT2-3 working daysPart No.76552
Filler Caps Oil
-
Oil Filler Cap with Dipstick suitable for John Deere - AL163619 Oil Filler Cap with Dipstick£16.76 Inc VAT £13.97 Exc VAT2-3 working daysPart No.80133
Exhaust Pipe
-
Exhaust Pipe suitable for John Deere - L112233 L115854 Exhaust PipeFitting Size: 77mmOverall Length: 1010mm£39.00 Inc VAT £32.50 Exc VATOut of stockPart No.80223
Silencer Pipe
-
Silencer Pipe suitable for John Deere - AL80501 Silencer Pipe£171.00 Inc VAT £142.50 Exc VATOut of stockPart No.72229
-
Silencer Box suitable for John Deere - AL117925 Silencer Exits From Right Hand Side Of Bonnet. Corner Post Type. Suits 6059T & 6068T Engines.£117.60 Inc VAT £98.00 Exc VAT2-3 working daysPart No.1650
-
