John Deere 6010 Series 6110 Engine PARTS
Cylinder Head Gasket
-
Head Gasket Set suitable for John Deere - RE526670 RE66082 Head Gasket Set£58.80 Inc VAT £49.00 Exc VAT2-3 working daysPart No.50370
Rocker Cover Gaskets
-
Rocker Cover Gasket suitable for John Deere - R123542 Rocker Cover Gasket£12.00 Inc VAT £10.00 Exc VAT2-3 working daysPart No.1605
Valve Springs
-
Valve Spring - R26125 suitable for John Deere - R26125 R504261 Valve Spring, can be used with both INLET and EXHAUST valve.Product Info- Overall length: 55cm- Overall diameter: 35mm£4.32 Inc VAT £3.60 Exc VAT2-3 working daysPart No.1495
Valve Collets
-
Valve Collet (Pair) suitable for John Deere - R91889 Valve Collet (Pair)£2.83 Inc VAT £2.36 Exc VAT2-3 working daysPart No.1614 -
Valve Collet (Pair) suitable for John Deere - T20077 Valve Collet (pair)£1.50 Inc VAT £1.25 Exc VAT2-3 working daysPart No.7407
Valve Ancillaries
-
Valve Stem Cap suitable for John Deere - T20129 Valve Stem CapOD: 13mmID: 9.4mmThickness: 6mm£3.60 Inc VAT £3.00 Exc VAT2-3 working daysPart No.1496
-
Valve Cap suitable for John Deere - RE31617 RE37643 RE37644 Valve CapID: 7.75mmOD: 18mmHeight: 12mm£3.00 Inc VAT £2.50 Exc VAT2-3 working daysPart No.1616 -
Exhaust Valve Seat - R85687 suitable for John Deere - R85687 Exhaust Valve Seat suitable for John DeereProduct Info- Inner Diameter: 34mm- Outer Diameter: 43mm£5.40 Inc VAT £4.50 Exc VAT2-3 working daysPart No.1619 -
Valve Retainer suitable for John Deere - RE31323 RE60005 Valve Retainer£10.50 Inc VAT £8.75 Exc VAT2-3 working daysPart No.1615
Studs Cylinder Head
-
Cylinder Head Stud - 112MM suitable for John Deere - R85363 1/2" UNC 112MM
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4.Then Rotate bolt a further 60 Degrees£10.91 Inc VAT £9.09 Exc VAT2-3 working daysPart No.1464A -
Cylinder Head Stud (Pack of 9) suitable for John Deere - R85363 (x9) 1/2" UNC, 9 Studs Per Pack.
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4. Rotate bolt a further 60 Degrees£22.80 Inc VAT £19.00 Exc VAT2-3 working daysPart No.1464
Cyl Block Gaskets
-
Complete Gasket Set suitable for John Deere - RE501455 RE527042 RE66086 Complete Gasket Set£65.99 Inc VAT £54.99 Exc VAT2-3 working daysPart No.50371
Oil Cooler
-
Oil Cooler suitable for John Deere - AL81176 6100,6200,6300- From Serial Number 113502.£539.10 Inc VAT £449.25 Exc VAT2-3 working daysPart No.9413
Oil Pumps
-
Oil Pump RE504914 suitable for John Deere - RE502269 RE504914 RE59582 Oil Pump.Show More£77.82 Inc VAT £64.85 Exc VAT2-3 working daysPart No.75570
Balancer Units
-
Balancer Bush - R115299 suitable for John Deere - R115299 ID: 40.2mm.OD: 43.34mm.Height: 27.7mm.£5.88 Inc VAT £4.90 Exc VAT2-3 working daysPart No.76577
Piston Engine
-
Piston, Pin & Clips suitable for John Deere - RE55512 Al-Fin Ring.Crown diameter: 104.730mm.Skirt diameter: 106.390mm.Compression height: 71.625mm.Overall height: 104.625mm.Chamber diameter: 56.94mm.Chamber depth: 25.45m... Show More£42.84 Inc VAT £35.70 Exc VAT2-3 working daysPart No.1602
Piston Rings Engine
-
Piston Ring Set - DD11831 suitable for John Deere - DD11831 RE15674 RE48818 No. of Rings = 3 (2.97 x 2.36 x 3.45)Please note - These are Agriline brand for the Federal Mogul equivalent please order part number 1443FM.£18.00 Inc VAT £15.00 Exc VAT2-3 working daysPart No.1443 -
Piston Ring Set - RE66271 suitable for John Deere - RE66271 For use with Piston 1600.Please note - These are Agriline brand for the Federal Mogul equivalent please order part number 1601FM.£21.60 Inc VAT £18.00 Exc VAT2-3 working daysPart No.1601 -
Piston Ring Set, Federal Mogul Brand - RE66271 suitable for John Deere - RE66271 For use with Piston Agriline Part No. 1600.Please note: These are Federal Mogul brand; for the Agriline equivalent please order part number 1601.£26.10 Inc VAT £21.75 Exc VAT2-3 working daysPart No.1601FM -
Piston Ring Set, Federal Mogul Brand - DD11831 suitable for John Deere - DD11831 RE15674 RE48818 No. of Rings: 3 (2.97 x 2.36 x 3.45)Please note: These are Federal Mogul brand; for the Agriline equivalent please order part number 1443.£25.68 Inc VAT £21.40 Exc VAT2-3 working daysPart No.1443FM
Engine Mount
-
Rubber Isolator - AL81953 suitable for John Deere - AL81953Rubber Isolator suitable for 5020, 6000, 6005, 6010, and 6020 Series John Deere applications.Product Info- Fits between engine and chassis rails- Inner Diameter: 13.5mm- Ou... Show More£8.40 Inc VAT £7.00 Exc VAT2-3 working daysPart No.76197
Liners Engine Cyl
-
Liner C/W Seals - R116397 suitable for John Deere - R116397 R115336 R116383 Liner which comes with sealing rings.Dimensions as follows -Bore diameter - 106.27mmFlange diameter - 125.80mmOverall height - 218.86mmFlange width - 9.75mmO... Show More£29.98 Inc VAT £24.98 Exc VAT2-3 working daysPart No.1604
Liner Shims & ORings
-
Liner Seal Kit suitable for John Deere - AR65507 Contains 3 Seals to Suit Liners 1444 & 1604£3.20 Inc VAT £2.67 Exc VAT2-3 working daysPart No.1450
Sump Gaskets
-
Sump Gasket Paper suitable for John Deere - R123353 R97342 R522030 Paper Alternative to 1481 (Cork)£9.59 Inc VAT £7.99 Exc VAT2-3 working daysPart No.1483 -
Sump Gasket Cork suitable for John Deere - R49515 R97342 R522030 Cork Alternative to 1483 (Paper)£8.40 Inc VAT £7.00 Exc VAT2-3 working daysPart No.1481
Crankshafts
-
Crankshaft - RE50618 suitable for John Deere - R113596 RE504638 RE50618 Genmot Crank Shaft suitable for John Deere *NOTE - Crankshaft will require cleaning to remove any rust preventative prior to fitting*DimensionsMain journal: 80mmConrod journal: 78mmNose length... Show More£570.00 Inc VAT £475.00 Exc VAT2-3 working daysPart No.1621Main Bearings
-
Main Bearing Pair +0.010" - John Deere RE65911 suitable for John Deere - RE65911 Main Bearing Pair +0.010" - John Deere RE65911Currently unavailablePart No.1609A -
Main Bearing Thrust (Pair) +0.010" - John Deere RE65912 suitable for John Deere - RE65912 Main Bearing Thrust (Pair) +0.010" - John Deere RE65912Currently unavailablePart No.1608A
Conrods
-
Conrod suitable for John Deere - R500335 RE500608 RE50770 ConrodSmall End/Pin size ID: 41mm.Big End ID: 82.5mm.Total Length: 312mm.Centre to Centre Length: 203mm.£60.00 Inc VAT £50.00 Exc VAT2-3 working daysPart No.72386
Conrod Bushes
-
Conrod Bush - R114082 suitable for John Deere - R114082 Suits John Deere 4045T 6068T 350 Series.4045H/T PowerTech.ID: 40.7mm.OD: 46.1mm.Wall thickness: 2.7mm.£4.56 Inc VAT £3.80 Exc VAT2-3 working daysPart No.76593
Conrod Bolts & Nuts
-
Conrod Bolt R114083 suitable for John Deere - R114083 R500500 Length: 64mm.John Deere 4045D, 6068D, 4045T, 6068T.£3.41 Inc VAT £2.84 Exc VAT2-3 working daysPart No.75569 -
CONROD BOLT - R501124 suitable for John Deere - R501124 Conrod Bolt.Length: 61mm.Thread: M12 x 1.25.£3.34 Inc VAT £2.78 Exc VAT2-3 working daysPart No.76395
Gears Crank
Crankshaft Seals
-
Front Crank Seal suitable for John Deere - RE505515 RE516340 RE52346 Front Crank Seal£15.59 Inc VAT £12.99 Exc VAT2-3 working daysPart No.1606
Camshaft
-
Camshaft suitable for John Deere - RE56375 CamshaftDimensions- Overall Length: 585mm- Journal Diameter: 55.80mm£163.63 Inc VAT £136.36 Exc VAT2-3 working daysPart No.1622
-
Camshaft Bush R119874 suitable for John Deere - R102840 R119874 R505418 John Deere 4039T, 6359DOD: 60mmID: 56mmLength: 38.8mm£8.28 Inc VAT £6.90 Exc VAT2-3 working daysPart No.75573
Air Filters
-
Air Filter- Inner suitable for John Deere - AL78224 Length: 131.8mm ID: 92.1mm. OD: 127.8mm. Flange Diameter: 198.4mm.Currently unavailablePart No.10211
Oil Filters
-
Oil Filter Spin On suitable for John Deere - RE59754 DZ118286 Oil Filter Spin On£12.00 Inc VAT £10.00 Exc VAT2-3 working daysPart No.10209
-
Fleetguard LF3703 Oil Filter suitable for John Deere - RE59574 RE59754 Overall height: 146mm, OD: 94mm, Thread size: 11/2 - 16 UN-2B UN-2B,£18.00 Inc VAT £15.00 Exc VATOut of stockPart No.LF3703
Fuel Filters
-
Fleetguard FS19975 Fuel Filter suitable for John Deere - RE529643 RE536193 Overall height: 196mm, OD: 83mm, Inside Ø - End 1: mm, Inside Ø - End 2: mm.£47.17 Inc VAT £39.31 Exc VAT2-3 working daysPart No.FS19975 -
Fleetguard FS19978 Fuel Filter suitable for John Deere - RE526657 RE526557 Overall height: 153mm, OD: 83mm, Inside Ø - End 1: mm, Inside Ø - End 2: mm.£34.24 Inc VAT £28.53 Exc VAT2-3 working daysPart No.FS19978 -
Fleetguard FS19840 Secondary Fuel Filter suitable for John Deere - RE52987 RE62419 RE64450Fleetguard FS19840 fuel water separator cartridge filter works to remove water and other particulates and ensures clean fuel is delivered to your engine.Length: 173.00 mmLargest OD: 84.00 mmL... Show More£33.47 Inc VAT £27.89 Exc VAT2-3 working daysPart No.FS19840
Fleetguard FS19814 Fuel Filter suitable for John Deere - Overall height: 148mm, OD: 84mm, Inside Ø - End 1: mm, Inside Ø - End 2: mm.£23.32 Inc VAT £19.43 Exc VAT2-3 working daysPart No.FS19814
Fleetguard FS19830 Fuel Filter suitable for John Deere - RE509208 RE517181 Overall height: 155mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.£21.60 Inc VAT £18.00 Exc VAT2-3 working daysPart No.FS19830
Fleetguard FS19831 Fuel Filter suitable for John Deere - RE503254 RE50455 RE62418 Overall height: 135mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.£26.40 Inc VAT £22.00 Exc VAT2-3 working daysPart No.FS19831
Secondary Fuel Filter suitable for John Deere - RE52987 RE62419 RE64450 Water Separator Element with Drain. Used On Models With Single Fuel Filter.Currently unavailablePart No.10206Primary Fuel Filter suitable for John Deere - RE509031 30 Microns.
O.D: 83.3mm.
I.D: 16.7mm One End.
Length: 151.6mm.
£25.22 Inc VAT £21.02 Exc VAT2-3 working daysPart No.10215
Fleetguard FS19861 Fuel Filter suitable for John Deere - RE534 RE53400 RE6445 Overall height: 155mm, OD: 84mm, Thread size: -,Currently unavailablePart No.FS19861
Filter Kits
-
Filter Service Kit suitable for John Deere - Contains; Oil Filter Fuel Filter Air Filter (Outer) Air Filter (Inner)£174.62 Inc VAT £145.52 Exc VATOut of stockPart No.FSK804 -
Filter Service Kit Premium suitable for John Deere -Filter Kit suitable for John Deere 6010 - 6410 Premium.With screw on transmission and hydraulic filters.Suitable for Powerquad transmission and 40cm³ hydraulic pump.K... Show More£293.57 Inc VAT £244.64 Exc VAT2-3 working daysPart No.FSK-5012
Fuel Lift Pumps
-
Fuel Pump suitable for John Deere - AL78405 Tank Mounted Fuel Pump- 2 Spade Socket- Pipe Diameter: 10mm- Includes mounting plate and filter£33.60 Inc VAT £28.00 Exc VATIn stockPart No.1613
Fuel Pumps Electric
-
Fuel Pump suitable for John Deere - AL78405 Mounted In Tank. Stanadyne.£125.11 Inc VAT £104.26 Exc VAT2-3 working daysPart No.9477
Fuel Pipes
-
Tee Fitting - R71963 suitable for John Deere - R71963 Tee fitting for Injectors suitable for John Deere.Thread: M14.£10.80 Inc VAT £9.00 Exc VAT2-3 working daysPart No.76562
Fuel Injectors
-
Injector Line Seal suitable for John Deere - R51936 I/D : 6.2mm
O/D : 10.5mm
Height : 5.8mm£0.24 Inc VAT £0.20 Exc VAT2-3 working daysPart No.1512 -
Fuel Injector RE60062 suitable for John Deere - RE60062 RE57469 SE500828 Fuel Injector.Tee Connector Not Included.Suitable For Replacing Injectors With Injector Nozzle Number:- 28478 / 32262£42.00 Inc VAT £35.00 Exc VAT2-3 working daysPart No.1612 -
Fuel Injector - RE48786 suitable for John Deere - RE48786 SE501101 Fuel Injector Nozzle - Marked 29279£46.80 Inc VAT £39.00 Exc VATOut of stockPart No.1611
Fuel Injector Nozzle
-
Injector Seal Kit - RE64292 suitable for John Deere - RE64292 Injector Seal Kit.Suitable for a wide range of John Deere machines fitted with 'Pencil Style' injectors.One kit required per Injector.£4.38 Inc VAT £3.65 Exc VAT2-3 working daysPart No.75961
Fuel Ancillaries
-
Fuel Shut Off Solenoid suitable for John Deere - RE22744 RE54064 Fuel Shut Off Solenoid£21.00 Inc VAT £17.50 Exc VATOut of stockPart No.2073 -
Fuel Cap suitable for John Deere - AL113086 AL113087 UK Made. Male Thread£9.00 Inc VAT £7.50 Exc VATOut of stockPart No.50442 -
Lockable Fuel Cap suitable for John Deere - AL113086 AL113087 UK Made. Case/IH. 3200 Series - From Serial Number JJE0925810.
£17.94 Inc VAT £14.95 Exc VATIn stockPart No.50443 -
Fuel Shut Off Solenoid - RE22744 suitable for John Deere - RE22744 RE54064 Fuel Shut Off SolenoidFuel Thread OD: 13.7mm£21.60 Inc VAT £18.00 Exc VATOut of stockPart No.2074
Fuel Filter Housings
-
Fuel Filter Sediment Bowl - RE51650 suitable for John Deere - RE51650 Fuel filter sediment bowl suitable for John DeereThread Size: M10 x 1.5OD: 80mm£34.80 Inc VAT £29.00 Exc VAT2-3 working daysPart No.76551
Filler Caps Oil
-
Oil Filler Cap with Dipstick suitable for John Deere - AL163619 Oil Filler Cap with Dipstick£16.76 Inc VAT £13.97 Exc VAT2-3 working daysPart No.80133
Exhaust Pipe
-
Exhaust Pipe suitable for John Deere - AL116902 Exhaust Pipe£75.00 Inc VAT £62.50 Exc VATOut of stockPart No.80220 -
Exhaust Pipe Heat Shield suitable for John Deere - L158903 Length 1480mm X 100mm.
£108.00 Inc VAT £90.00 Exc VATOut of stockPart No.80226 -
Exhaust Pipe suitable for John Deere - L110393 Suitable for John Deere 6000 & 6010 Series.Currently unavailablePart No.74598
Silencer Pipe
-
Silencer suitable for John Deere - AL82411Silencer, RH side mountedDimensions- Inlet ID: 60.70mm- Exhaust OD: 64mm- Body Length: 245mm- Body Width: 175m... Show More£94.80 Inc VAT £79.00 Exc VAT2-3 working daysPart No.1624
Silencer AL78007 suitable for John Deere - AL78007 Silencer Exits From Left Hand Side Of Bonnet.£165.00 Inc VAT £137.50 Exc VAT2-3 working daysPart No.1599
Silencer Box suitable for John Deere - AL113991 AL78267 Exhaust Exits From Left Hand Side of Bonnet. Type: Underhood. Finish: Heat Resistant Black or galvanised£99.00 Inc VAT £82.50 Exc VATOut of stockPart No.1649Silencer Pipe - L102236 suitable for John Deere - L102236Silencer Pipe suitable for John Deere. 6100 - From Serial Number 143102. 6200 - From Serial Number 143102. 6300 - From Serial Number 143102. 6400 - From Serial Number 143102.Product Info- Mou... Show More£45.00 Inc VAT £37.50 Exc VAT2-3 working daysPart No.1633
Silencer Box suitable for John Deere - AL117294 Underhood. Heat Resistant black finish.Fitting Diameter = 66mm£99.00 Inc VAT £82.50 Exc VATOut of stockPart No.1632
Valves Engine
-
Exhaust Valve suitable for John Deere - R90692 Exhaust Valve£9.00 Inc VAT £7.50 Exc VAT2-3 working daysPart No.1617
-
Inlet Valve suitable for John Deere - R98062 Inlet Valve£9.00 Inc VAT £7.50 Exc VAT2-3 working daysPart No.1618
-
-



































































