John Deere 6010 Series 6610 Engine PARTS
Cylinder Head Gasket
-
Head Gasket Set suitable for John Deere - RE526672 Head Gasket Set£83.88 Inc VAT £69.90 Exc VAT2-3 working daysPart No.50372 -
Head Gasket suitable for John Deere - R116516 Head Gasket£34.80 Inc VAT £29.00 Exc VAT2-3 working daysPart No.50373
Rocker Cover Gaskets
-
Rocker Cover Gasket suitable for John Deere - R123543 Rocker Cover Gasket£15.00 Inc VAT £12.50 Exc VAT2-3 working daysPart No.50223
Valve Springs
-
Valve Spring - R26125 suitable for John Deere - R26125 R504261 Valve Spring, can be used with both INLET and EXHAUST valve.Product Info- Overall length: 55cm- Overall diameter: 35mm£4.32 Inc VAT £3.60 Exc VAT2-3 working daysPart No.1495
Valve Collets
-
Valve Collet (Pair) suitable for John Deere - R91889 Valve Collet (Pair)£2.83 Inc VAT £2.36 Exc VAT2-3 working daysPart No.1614 -
Valve Collet (Pair) suitable for John Deere - T20077 Valve Collet (pair)£1.50 Inc VAT £1.25 Exc VAT2-3 working daysPart No.7407
Valve Ancillaries
-
Valve Stem Cap suitable for John Deere - T20129 Valve Stem CapOD: 13mmID: 9.4mmThickness: 6mm£3.60 Inc VAT £3.00 Exc VAT2-3 working daysPart No.1496
-
Valve Cap suitable for John Deere - RE31617 RE37643 RE37644 Valve CapID: 7.75mmOD: 18mmHeight: 12mm£3.00 Inc VAT £2.50 Exc VAT2-3 working daysPart No.1616 -
Valve Tappet suitable for John Deere - T20073 Valve Tappet£7.20 Inc VAT £6.00 Exc VAT2-3 working daysPart No.1502
-
Exhaust Valve Seat - R85687 suitable for John Deere - R85687 Exhaust Valve Seat suitable for John DeereProduct Info- Inner Diameter: 34mm- Outer Diameter: 43mm£5.40 Inc VAT £4.50 Exc VAT2-3 working daysPart No.1619 -
Valve Retainer suitable for John Deere - RE31323 RE60005 Valve Retainer£10.50 Inc VAT £8.75 Exc VAT2-3 working daysPart No.1615
Studs Cylinder Head
-
Cylinder Head Stud - 112MM suitable for John Deere - R85363 1/2" UNC 112MM
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4.Then Rotate bolt a further 60 Degrees£10.91 Inc VAT £9.09 Exc VAT2-3 working daysPart No.1464A -
Cylinder Head Stud (Pack of 9) suitable for John Deere - R85363 (x9) 1/2" UNC, 9 Studs Per Pack.
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4. Rotate bolt a further 60 Degrees£22.80 Inc VAT £19.00 Exc VAT2-3 working daysPart No.1464
Cyl Block Gaskets
-
Complete Gasket Set - RE66087 suitable for John Deere - R501456 RE501456 RE526965 Complete Gasket Set£90.00 Inc VAT £75.00 Exc VAT2-3 working daysPart No.53219
Oil Pumps
-
Oil Pump RE504914 suitable for John Deere - RE502269 RE504914 RE59582 Oil Pump.Show More£77.82 Inc VAT £64.85 Exc VAT2-3 working daysPart No.75570
Piston Engine
-
Piston, Pin & Clips suitable for John Deere - RE55512 Al-Fin Ring.Crown diameter: 104.730mm.Skirt diameter: 106.390mm.Compression height: 71.625mm.Overall height: 104.625mm.Chamber diameter: 56.94mm.Chamber depth: 25.45m... Show More£42.84 Inc VAT £35.70 Exc VAT2-3 working daysPart No.1602
Piston Rings Engine
-
Piston Ring Set - DD11831 suitable for John Deere - DD11831 RE15674 RE48818 No. of Rings = 3 (2.97 x 2.36 x 3.45)Please note - These are Agriline brand for the Federal Mogul equivalent please order part number 1443FM.£18.00 Inc VAT £15.00 Exc VAT2-3 working daysPart No.1443 -
Piston Ring Set, Federal Mogul Brand - DD11831 suitable for John Deere - DD11831 RE15674 RE48818 No. of Rings: 3 (2.97 x 2.36 x 3.45)Please note: These are Federal Mogul brand; for the Agriline equivalent please order part number 1443.£25.68 Inc VAT £21.40 Exc VAT2-3 working daysPart No.1443FM
Liners Engine Cyl
-
Liner C/W Seals - R116397 suitable for John Deere - R116397 R115336 R116383 Liner which comes with sealing rings.Dimensions as follows -Bore diameter - 106.27mmFlange diameter - 125.80mmOverall height - 218.86mmFlange width - 9.75mmO... Show More£29.98 Inc VAT £24.98 Exc VAT2-3 working daysPart No.1604
Liner Shims & ORings
-
Liner Seal Kit suitable for John Deere - AR65507 Contains 3 Seals to Suit Liners 1444 & 1604£3.20 Inc VAT £2.67 Exc VAT2-3 working daysPart No.1450
Sump Gaskets
-
Paper Gasket suitable for John Deere - R56933 R97344 Paper GasketFor cork version please order Agriline part number 76348.£10.80 Inc VAT £9.00 Exc VAT2-3 working daysPart No.1482 -
Cork Sump Gasket suitable for John Deere - R56933 R97344 Cork sump gasket.For Paper gasket, please order Agriline Part No. 1482.£7.20 Inc VAT £6.00 Exc VAT2-3 working daysPart No.76348
Crankshafts
-
Crankshaft RE505921 suitable for John Deere - RE505921 Tappered Nose
6 Bolt Hole Flywheel Fixing
£948.00 Inc VAT £790.00 Exc VAT2-3 working daysPart No.74246 -
Crankshaft RE505921 suitable for John Deere - RE505921 Crankshaft6 Bolt Hole Flywheel FixingMains: 3.1235"/3.064"Conrods: 3.0635"/3.064"Stroke: 5.000"Lip SealHol... Show More£1,080.00 Inc VAT £900.00 Exc VAT2-3 working daysPart No.74254
Crankshaft (Genmot) suitable for John Deere - RE504639 RE515785 RE52850Straight Nose7 Holes flywheel end4 Bolt Holes crank pulley end£1,320.00 Inc VAT £1,100.00 Exc VAT2-3 working daysPart No.75501
Conrod Bearings
-
Conrod Bearing Pair suitable for John Deere - RE65908 Standard Size£10.80 Inc VAT £9.00 Exc VAT2-3 working daysPart No.1607
-
Conrod Bearing Pair +0.010" - John Deere RE65909 suitable for John Deere - RE65909 Conrod Bearing Pair +0.010" - John Deere RE65909£10.80 Inc VAT £9.00 Exc VAT2-3 working daysPart No.1607A
Main Bearings
-
Main Bearing Pair +0.010" - John Deere RE65911 suitable for John Deere - RE65911 Main Bearing Pair +0.010" - John Deere RE65911Currently unavailablePart No.1609A -
Main Bearing Pair suitable for John Deere - AT21139 Flanged Bearing With Intergrated Thrust - STD.£20.92 Inc VAT £17.43 Exc VAT2-3 working daysPart No.1486
-
Main Bearing Thrust (Pair) +0.010" - John Deere RE65912 suitable for John Deere - RE65912 Main Bearing Thrust (Pair) +0.010" - John Deere RE65912Currently unavailablePart No.1608A
Conrods
-
Conrod suitable for John Deere - R500335 RE500608 RE50770 ConrodSmall End/Pin size ID: 41mm.Big End ID: 82.5mm.Total Length: 312mm.Centre to Centre Length: 203mm.£60.00 Inc VAT £50.00 Exc VAT2-3 working daysPart No.72386
Conrod Bushes
-
Conrod Bush - R114082 suitable for John Deere - R114082 Suits John Deere 4045T 6068T 350 Series.4045H/T PowerTech.ID: 40.7mm.OD: 46.1mm.Wall thickness: 2.7mm.£4.56 Inc VAT £3.80 Exc VAT2-3 working daysPart No.76593
Conrod Bolts & Nuts
-
Conrod Bolt - R74195 suitable for John Deere - R56445 R74195 Conrod BoltDimensions- Thread: 1/2UNF x 35- Overall Length: 74.80mm£4.03 Inc VAT £3.36 Exc VAT2-3 working daysPart No.75568 -
Conrod Bolt R114083 suitable for John Deere - R114083 R500500 Length: 64mm.John Deere 4045D, 6068D, 4045T, 6068T.£3.41 Inc VAT £2.84 Exc VAT2-3 working daysPart No.75569 -
CONROD BOLT - R501124 suitable for John Deere - R501124 Conrod Bolt.Length: 61mm.Thread: M12 x 1.25.£3.34 Inc VAT £2.78 Exc VAT2-3 working daysPart No.76395
Crankshaft Seals
-
Front Crank Seal suitable for John Deere - RE505515 RE516340 RE52346 Front Crank Seal£15.59 Inc VAT £12.99 Exc VAT2-3 working daysPart No.1606
Fly Wheel
-
Fly Wheel Ring Gear suitable for John Deere - Fly Wheel Ring Gear£46.80 Inc VAT £39.00 Exc VAT2-3 working daysPart No.72514
Camshaft
-
Camshaft Bush - R87561 suitable for John Deere - R87561 R527877 ID: 67.50mm.OD: 70.00mm.Height: 25.30mm.£7.14 Inc VAT £5.95 Exc VAT2-3 working daysPart No.76578
Air Filters
-
Fleetguard AF820M Inner Air Filter suitable for John Deere - AT131683 AU43090 AZ45870 Inner Air Filter£40.75 Inc VAT £33.96 Exc VAT2-3 working daysPart No.AF820M -
Air Filter- Inner suitable for John Deere - AL78870 Length: 130.2mm. ID: 118.3mm. OD: 161.6mm.Currently unavailablePart No.10208
Oil Filters
-
Oil Filter Spin On suitable for John Deere - RE59754 DZ118286 Oil Filter Spin On£12.00 Inc VAT £10.00 Exc VAT2-3 working daysPart No.10209
-
Fleetguard LF3567 Oil Filter suitable for John Deere - DZ101880 AR101278 RE57394 Overall height: 169mm, OD: 129mm, Thread size: 11/2 - 12 UNF-2B UNF-2B,£30.71 Inc VAT £25.59 Exc VAT2-3 working daysPart No.LF3567 -
Oil Filter- Spin On suitable for John Deere - AR101278 RE46380 RE57394 Full-Flow Lube Spin-on.£34.08 Inc VAT £28.40 Exc VAT2-3 working daysPart No.1587 -
Fleetguard LF3703 Oil Filter suitable for John Deere - RE59574 RE59754 Overall height: 146mm, OD: 94mm, Thread size: 11/2 - 16 UN-2B UN-2B,£18.00 Inc VAT £15.00 Exc VATOut of stockPart No.LF3703
Fuel Filters
-
Fuel Filter- Element suitable for John Deere - AR86745 RE27091 Dual-Stage Box-Style Metal Fuel Filter.£34.80 Inc VAT £29.00 Exc VATOut of stockPart No.1586 -
Fleetguard FS19840 Secondary Fuel Filter suitable for John Deere - RE52987 RE62419 RE64450Fleetguard FS19840 fuel water separator cartridge filter works to remove water and other particulates and ensures clean fuel is delivered to your engine.Length: 173.00 mmLargest OD: 84.00 mmL... Show More£33.47 Inc VAT £27.89 Exc VAT2-3 working daysPart No.FS19840
Fleetguard FF5850 Inline Fuel Filter - AL153517 suitable for John Deere - AL153517Fleetguard FF5850 in-line fuel filter ensures optimal fuel system protection from contaminants.Media Type: Wire MeshLength: 117.50 mm£11.40 Inc VAT £9.50 Exc VAT2-3 working daysPart No.FF5850
Fleetguard FS19830 Fuel Filter suitable for John Deere - RE509208 RE517181 Overall height: 155mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.£21.60 Inc VAT £18.00 Exc VAT2-3 working daysPart No.FS19830
Fleetguard FS19831 Fuel Filter suitable for John Deere - RE503254 RE50455 RE62418 Overall height: 135mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.£26.40 Inc VAT £22.00 Exc VAT2-3 working daysPart No.FS19831
Secondary Fuel Filter suitable for John Deere - RE52987 RE62419 RE64450 Water Separator Element with Drain. Used On Models With Single Fuel Filter.Currently unavailablePart No.10206Primary Fuel Filter suitable for John Deere - RE509031 30 Microns.
O.D: 83.3mm.
I.D: 16.7mm One End.
Length: 151.6mm.
£25.22 Inc VAT £21.02 Exc VAT2-3 working daysPart No.10215
Fuel Filter 5 Micron Final Filter suitable for John Deere - RE503254 RE50455 RE62418 Secondary Fuel/Water Coalescer Element with Drain.Currently unavailablePart No.1585
Fleetguard FS19861 Fuel Filter suitable for John Deere - RE534 RE53400 RE6445 Overall height: 155mm, OD: 84mm, Thread size: -,Currently unavailablePart No.FS19861
Filter Kits
-
Engine Filter Service Kit suitable for John Deere -Engine filter service kit suitable for John Deere 6510-6910 tractors.For SE and Premium modelsKit Contains- Engine Oil Filter- Fuel Filter... Show More£192.00 Inc VAT £160.00 Exc VATOut of stockPart No.FSK-5014
Fuel Lift Pumps
-
Fuel Lift Pump suitable for John Deere - DD13483 DD14292 RE27667 Replacement for original Sofabex or Corona style Lift Pumps.Gasket Included£25.80 Inc VAT £21.50 Exc VATIn stockPart No.55016 -
Fuel Pump suitable for John Deere - AL78405 Tank Mounted Fuel Pump- 2 Spade Socket- Pipe Diameter: 10mm- Includes mounting plate and filter£33.60 Inc VAT £28.00 Exc VATIn stockPart No.1613
Fuel Pumps Electric
-
Fuel Pump suitable for John Deere - AL78405 Mounted In Tank. Stanadyne.£125.11 Inc VAT £104.26 Exc VAT2-3 working daysPart No.9477 -
Filter Head Fuel Pump suitable for John Deere - RE509530 Filter Head Fuel Pump.Two Metal Prongs Inside Connecting Plug.£113.99 Inc VAT £94.99 Exc VATOut of stockPart No.9602
Fuel Pipes
-
Tee Fitting - R71963 suitable for John Deere - R71963 Tee fitting for Injectors suitable for John Deere.Thread: M14.£10.80 Inc VAT £9.00 Exc VAT2-3 working daysPart No.76562
Fuel Injectors
-
Injector Line Seal suitable for John Deere - R51936 I/D : 6.2mm
O/D : 10.5mm
Height : 5.8mm£0.24 Inc VAT £0.20 Exc VAT2-3 working daysPart No.1512 -
Fuel Injector RE60062 suitable for John Deere - RE60062 RE57469 SE500828 Fuel Injector.Tee Connector Not Included.Suitable For Replacing Injectors With Injector Nozzle Number:- 28478 / 32262£42.00 Inc VAT £35.00 Exc VAT2-3 working daysPart No.1612 -
Fuel Injector - RE48786 suitable for John Deere - RE48786 SE501101 Fuel Injector Nozzle - Marked 29279£46.80 Inc VAT £39.00 Exc VATOut of stockPart No.1611
Fuel Injector Nozzle
-
Injector Seal Kit - RE64292 suitable for John Deere - RE64292 Injector Seal Kit.Suitable for a wide range of John Deere machines fitted with 'Pencil Style' injectors.One kit required per Injector.£4.38 Inc VAT £3.65 Exc VAT2-3 working daysPart No.75961
Fuel Ancillaries
-
Fuel Shut Off Solenoid suitable for John Deere - RE22744 RE54064 Fuel Shut Off Solenoid£21.00 Inc VAT £17.50 Exc VATOut of stockPart No.2073 -
Fuel Cap suitable for John Deere - AL113086 AL113087 UK Made. Male Thread£9.00 Inc VAT £7.50 Exc VATOut of stockPart No.50442 -
Lockable Fuel Cap suitable for John Deere - AL113086 AL113087 UK Made. Case/IH. 3200 Series - From Serial Number JJE0925810.
£17.94 Inc VAT £14.95 Exc VATIn stockPart No.50443 -
Fuel Shut Off Solenoid - RE22744 suitable for John Deere - RE22744 RE54064 Fuel Shut Off SolenoidFuel Thread OD: 13.7mm£21.60 Inc VAT £18.00 Exc VATOut of stockPart No.2074
Fuel Filter Housings
-
Fuel Filter Sediment Bowl - RE51650 suitable for John Deere - RE51650 Fuel filter sediment bowl suitable for John DeereThread Size: M10 x 1.5OD: 80mm£34.80 Inc VAT £29.00 Exc VAT2-3 working daysPart No.76551
Filler Caps Oil
-
Oil Filler Cap with Dipstick suitable for John Deere - AL163619 Oil Filler Cap with Dipstick£16.76 Inc VAT £13.97 Exc VAT2-3 working daysPart No.80133
Gaskets Manifold
-
Exhaust Manifold Ring - R122595 suitable for John Deere - R122595 Exhaust manifold ring.Out of stockPart No.76516
Exhaust Pipe
-
Flexible Exhaust Coupler suitable for John Deere - AL114384 I.D: 61mm.
Approx. Length: 255mm.
£75.00 Inc VAT £62.50 Exc VAT2-3 working daysPart No.80128 -
Exhaust Pipe suitable for John Deere - L112233 L115854 Exhaust PipeFitting Size: 77mmOverall Length: 1010mm£39.00 Inc VAT £32.50 Exc VATOut of stockPart No.80223 -
Exhaust Pipe Heat Shield suitable for John Deere - L113658 Length 1340mm X 125mm.
£108.00 Inc VAT £90.00 Exc VAT2-3 working daysPart No.80227
Silencer Pipe
-
Silencer Pipe suitable for John Deere - AL116287 Deluxe Exhaust. Length: 1770mm Diameter: 66mm.£75.00 Inc VAT £62.50 Exc VATOut of stockPart No.1652 -
Silencer Pipe suitable for John Deere - L113259 Lower Pipe. Length: 735mm. Diameter: 63mm.£60.00 Inc VAT £50.00 Exc VAT2-3 working daysPart No.1653 -
Silencer Box suitable for John Deere - AL117923 Silencer Exits From Left Hand Side Of The Bonnet.£132.00 Inc VAT £110.00 Exc VAT2-3 working daysPart No.1651
Valves Engine
-
Exhaust Valve suitable for John Deere - R90692 Exhaust Valve£9.00 Inc VAT £7.50 Exc VAT2-3 working daysPart No.1617
-
Inlet Valve suitable for John Deere - R98062 Inlet Valve£9.00 Inc VAT £7.50 Exc VAT2-3 working daysPart No.1618
-




































































